AMI BIOS Unlock request

[lecky2010]

take a look at this mate iam pretty sure your board is made by ecs (elitegroup) take a look at the link. top to on the list motherboards let me know what you think
thanks lecky
http://www.ecs.com.tw/ECSWebSite/Product...ket%201156

Login or Register to remove this ad

[lukemilburn]

No, afraid not. Thanks for trying though

[lecky2010]

(02-14-2011 06:25 PM)lukemilburn Wrote:  No, afraid not. Thanks for trying though

no problem sorry i couldn't help
thanks lecky

[mcurran]

(02-14-2011 04:07 PM)lecky2010 Wrote:  

(02-14-2011 02:59 PM)mcurran Wrote:  Could you guys please take a look at the following BIOS and let me know if you have any luck? emachines really left nothing for the user with their OEM BIOS. I had an older emachines with an unlocked BIOS, and I'm used to having a little control of FSB, memory clocks, and sometimes the multiplier (which would be awesome on this rig). Keep up the good work guys. I would greatly appreciate any help on this one.


MCP61PM-GM REV: 2.4 15-V06-012400
emachines ET1331G-07w P01-A2L
AMERICAN MEGATRENDS

BIOS LINKS (P01-A2L ROM ATTACHED):

http://global-download.acer.com/GDFiles/...s&SC=PA_6E

http://global-download.acer.com/GDFiles/...s&SC=PA_6E

Hi there mcurran
Sorry but there are no locked options apart from fan controls again have a hunt for a simular retail bios and i could run a comparison but it still might not work at
thanks lecky
take a look at this see what you think
link http://www.bios-mods.com/forum/Thread-HP...ng-Options

Thanks Lecky. I successfully flashed my BIOS to the HP MCP61PM-HM (Nettle3) modded ROM image (61M27604.ROM), but there were actually less options available... Even though the HT BUS was unlocked and the DRAM Frequency was also unlocked (No voltage, FSB, or Multiplier settings were available): All the settings were less than stock for the emachines OEM BIOS I had previously (P01-A2L). For instance the DRAM Frequency was unlocked, but only allowed up to a maximum of 400MHz, which is what it was already running at. Same goes for the HT BUS, (400MHz). My memory actually runs at 800MHz stock. Please let me know if there is any progress with the ROM image I supplied, or any similar ROM's for the MCP61PM-GM board... For anyone looking to use the modded BIOS: I needed to use AFUDOS with the /X flag, because AWDFLASH.EXE was complaining, "Binary File is not Aware BIOS!"

[lecky2010]

(02-14-2011 10:29 PM)mcurran Wrote:  

(02-14-2011 04:07 PM)lecky2010 Wrote:  

(02-14-2011 02:59 PM)mcurran Wrote:  Could you guys please take a look at the following BIOS and let me know if you have any luck? emachines really left nothing for the user with their OEM BIOS. I had an older emachines with an unlocked BIOS, and I'm used to having a little control of FSB, memory clocks, and sometimes the multiplier (which would be awesome on this rig). Keep up the good work guys. I would greatly appreciate any help on this one.


MCP61PM-GM REV: 2.4 15-V06-012400
emachines ET1331G-07w P01-A2L
AMERICAN MEGATRENDS

BIOS LINKS (P01-A2L ROM ATTACHED):

http://global-download.acer.com/GDFiles/...s&SC=PA_6E

http://global-download.acer.com/GDFiles/...s&SC=PA_6E

Hi there mcurran
Sorry but there are no locked options apart from fan controls again have a hunt for a simular retail bios and i could run a comparison but it still might not work at
thanks lecky
take a look at this see what you think
link http://www.bios-mods.com/forum/Thread-HP...ng-Options

Thanks Lecky. I successfully flashed my BIOS to the HP MCP61PM-HM (Nettle3) modded ROM image (61M27604.ROM), but there were actually less options available... Even though the HT BUS was unlocked and the DRAM Frequency was also unlocked (No voltage, FSB, or Multiplier settings were available): All the settings were less than stock for the emachines OEM BIOS I had previously (P01-A2L). For instance the DRAM Frequency was unlocked, but only allowed up to a maximum of 400MHz, which is what it was already running at. Same goes for the HT BUS, (400MHz). My memory actually runs at 800MHz stock. Please let me know if there is any progress with the ROM image I supplied, or any similar ROM's for the MCP61PM-GM board... For anyone looking to use the modded BIOS: I needed to use AFUDOS with the /X flag, because AWDFLASH.EXE was complaining, "Binary File is not Aware BIOS!"

Hi mate, sorry i have been away from my desk for a few days. have you tried hitting ctrl+f1 in the bios menu? then check in advanced chipset (i thing ) let me now what happens. i will have a more in-depth look at original rom tonight
thans lecky

[Bill9850]

MCP61PM-GM IN GATEWAY gt5670 gt5674
BEST STOCK BIOS EMACHINE ET1161 SUPPORTS 4 X CPU NO XTRAS.

ASUS M2NMX BIOS BOOTS WITH 3 AND 4 CORE CPU .ATHLON 640 BOOTS BUT NOT PROPERLY IDENTIFIED(UKNOWN CPU).PHENOMS SEEM OK. CPU FAN ON FULL SPEED. FSB SETTINGS WORK. CPU TEMP INCORRECT, READS 89C WHEN SHOULD BE 38C, CAUSE OF FAN FULL SPEED. i HAD NO POST WITH ABIT MOD BIOS , AS WELL AS NETTLE.ALSO TRIED ABIT NF-M2PV - NO LUCK
AFUDOS WITH /P /B /X X DOES NOT CHECK ID STRING

[mcurran]

Sorry to BUMP an old thread, but I just wanted to mention a couple things.

My motherboard is a MCP61PM-GM 2.4, and I was just upgrading my neighbors machine, which has the proper Nettle2 board (MCP61PM-HM 1). I was amazed to see all the FSB, RAM timing, and other goodies available.

Point is, I was thinking of swapping out the boards for one another, but I have no thermal grease. So I can either swap my AMD Athlon II X2 220 for a AMD Athlon 64 x2 5000+ along with the board and have all the unlocked options, but I'm pretty sure my 220 is a much more powerful CPU.

Does anybody have any suggestions?