AMI Bios flash tool - AFUDOS.EXE

[f3bandit]

Here's the command line syntax for AFUDOS.EXE "AMI FLASH UTILITY for DOS". Type these commands just like you see them, while replacing "mybios.rom" with the name of the file and ext you are trying to flash. This should help alot of people struggling with understanding how to type these commands properly.
Display ROM file's ROM ID

Code:

afudos mybios.rom /U

Save current system BIOS ROM into disk

Code:

afudos mybios.rom /O

AFUDOS Help

Code:

afudos /h

Update Boot Block only

Code:

afudos mybios.rom /B

Update main BIOS image only

Code:

afudos mybios.rom /P

Update NVRAM only

Code:

afudos mybios.rom /N

Update Embedded Controller Block only

Code:

afudos mybios.rom /E

Update Embedded Controller Block if newer version is detected

Code:

afudos mybios.rom /ECUF

Update 2nd non-critical block only

Code:

afudos mybios.rom /K2

Update main BIOS image, Boot Block and NVRAM at once

Code:

afudos mybios.rom /P /B /N

Update whole BIOS ROM

Code:

afudos mybios.rom /P /B /N /C /E /K

Update whole BIOS ROM and load current CMOS optimal settings

Code:

afudos mybios.rom /P /B /N /C /E /K /L0

Update whole BIOS without checking ROM ID <-Don't use unless your sure

Code:

afudos mybios.rom /P /B /N /C /E /K /X

Update whole BIOS with quiet execution

Code:

afudos mybios.rom /P /B /N /C /E /K /Q

Update whole BIOS in quiet mode and REBOOT quietly

Code:

afudos mybios.rom /P /B /N /C /E /K /Q /REBOOT

Update BootBlock MAC address<-Used for changing MAC if your mobo has onboard Ethenet that supports the option to boot from network

Code:

c:\>afudos /M "MAC_ADDRESS"

Update whole BIOS and BootBlock MAC address<-Used for changing MAC if your mobo has onboard Ethenet that supports the option to boot from network

Code:

afudos mybios.rom /P /B /N /C /E /K /M "MAC_ADDRESS"

Update whole BIOS except existing SMBIOS structures<-this prevents overwriting current DMI and CIM data in the bios

Code:

afudos mybios.rom /P /B /N /C /E /K /R

Update whole BIOS but preserve SMBIOS type 0 and 11<-this prevents overwriting current DMI and CIM data at specific locations in the bios

Code:

afudos mybios.rom /P /B /N /C /E /K /R0 /R11