Gateway MX6955 - SLIC 2.1 Request

[linuxgod64]

Gateway MX6955 - SLIC 2.1 Request

Original file is here:

ftp://esupport:vImvF88@ftp.gateway.com/pub/hardware_support/drivers/win_vista/bios/7712.exe

Thank you

[1234s282]

Here you go , i used Acer 2.1 SLIC (Acer Bought Gateway , Hence No Gateway 2.1 SLIC) + Certificate Included:-

This Bios works on ALL of the following models:-

ML6000 Series:

1014296R - Gateway ML6703

MP6000 Series:

1009031 - Gateway MP6954
1009092 - Gateway MP6954h

MT6000 Series:

1014129R - Gateway MT6451
1014310R - Gateway MT6704h
1014127R - Gateway MT6821
1014314R - Gateway MT6828
1014325R - Gateway MT6828h

MX6200 Series:

1009028 - Gateway MX6214
1013916R - Gateway MX6216

MX6900 Series:

1009030 - Gateway MX6920
1009066 - Gateway MX6912
1009072 - Gateway MX6919
1009090 - Gateway MX6920h
1009136 - Gateway MX6927
1013918R - Gateway MX6931
1013928R - Gateway MX6930
1013973R - Gateway MX6930H
1013974R - Gateway MX6931H
1014028R - Gateway MX6955
1014033R - Gateway MX6956
1014061R - Gateway MX6959
1014065R - Gateway MX6957
1014068R - Gateway MX6960
1014072R - Gateway MX6958
1014080R - Gateway MX6961
1014112R - Gateway MX6961H
1008963 - Gateway MX6951
1008962 - Gateway MX6951H
1008869 - Gateway MX6910H

NX510 Series:

1008796 - Gateway NX510S
1008797 - Gateway NX510X

NX570 Series:

1009162 - Gateway NX570S
1014077R - Gateway NX570X
1014079R - Gateway NX570QS
1014119R - Gateway NX570S
1009146 - Gateway NX570xl
1014078R - Gateway NX570xl

Instructions

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Gateway%2...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

[linuxgod64]

Well, my first attempt failed. I imagine it's the fact that the version I have installed right now is SLiP streamed.

I will try to install a fresh copy and let you know.

I believe the flash took though.

[1234s282]

please run http://dl.dropbox.com/u/747181/SLIC_Dump_ToolKit.EXE and post screenshots of each tab to help us identify whether the mod took corerctly or there may be some things that need fixing in the mod!

Thanks
Admin

[linuxgod64]

ok, here are the screenshots.

I tried it on a new install of Windows 7 Ultimate, and failed also.

[/url]





[url=http://www.thainhunter.com/Capture1.PNG]

---

I hope this is ok, I tried to post links, but it wouldn't take.

These are snapshots from a new install of Windows 7 Ultimate and flashing bios and following the instructions given.

[1234s282]

The mod doesnt seem to have took

Ive remodded it , please re download the file using the same download link

Regards
Admin

[linuxgod64]

Well, this is disturbing...

I downloaded the new mod, flashed it (which completed successfully), re-did the instructions posted, and I get the same error. No SLIC found.

[1234s282]

This is a Requirement with Each Difficult Phoenix/Insyde Mod

Request .

How To Create An RW Everything Report

Download and Install RWEverything from one of the following links:

http://jacky5488.myweb.hinet.net/
http://jacky5488.myweb.hinet.net/bin/RwV1.4.zip
http://slics.myftp.org/Tools/RwV1.4.rar

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this Report to the desktop WITHOUT CHANGING THE NAME and either attach this file to your post or upload it to one of the following:

http://www.box.net or http://www.mediafire.com or

http://www.sendspace.com

If you upload your RWEverything Report to one of the 3 host servers above, post the download link of your RWEverthing Report in the Post of your Mod Request.

Below is the preferred method in which to post your mod requests:

-Manufacturer:
-Motherboard Model:
-Bios revision:
-Bios Type:
-Bios Download Link:
-RW Everything Report Download Link:

Regards
Admin

[linuxgod64]

(03-12-2010 11:00 PM)1234s282 Wrote:  This is a Requirement with Each Difficult Phoenix/Insyde Mod

Request .

How To Create An RW Everything Report

Download and Install RWEverything from one of the following links:

http://jacky5488.myweb.hinet.net/
http://jacky5488.myweb.hinet.net/bin/RwV1.4.zip
http://slics.myftp.org/Tools/RwV1.4.rar

Open RWEverything.

After RWEverything Opens, click ACCESS - ACPI Tables.

When ACPI Tables opens, click anywhere within the ACPI Window.

Now click CONTROL + F2 to save the entire table.

Save this Report to the desktop WITHOUT CHANGING THE NAME and either attach this file to your post or upload it to one of the following:

http://www.box.net or http://www.mediafire.com or

http://www.sendspace.com

If you upload your RWEverything Report to one of the 3 host servers above, post the download link of your RWEverthing Report in the Post of your Mod Request.

Below is the preferred method in which to post your mod requests:

-Manufacturer:
-Motherboard Model:
-Bios revision:
-Bios Type:
-Bios Download Link:
-RW Everything Report Download Link:

Regards
Admin

Ok, here you go.

-Manufacturer: Gateway
-Motherboard Model: MX6955
-Bios revision: 77.12
-Bios Type: Pheonix
-Bios Download Link: ftp://esupport:vImvF88@ftp.gateway.com/p...s/7712.exe


I have my own server, so I posted the file here:
http://www.thainhunter.com/AcpiTbls.rw

[1234s282]

Right , we are experiencing some issues with this mod. In order for us to assist you , please follow the instructions below.

1. Flash the ORIGINAL , UNMODDED Gateway Bios.

2. Generate a new RW Everything Report.

3. Post New Report

4. Wait for new modded bios

5. Run SLIC Dump Toolkit and Post Screenshots

This BIOS cannot be modded using our tools so we have to manually mod it

Thanks

Admin