Gigabyte G31M-ES2L (Rev 1.X) F10 Gigabyte 2.1 SLIC

[bombaclat]

Rev 2.0 was already requested, but not 1.x

Bios Link: http://asia.giga-byte.com/FileList/BIOS/motherboard_bios_ga-g31m-es2l_f10.exe

Thanks.

[1234s282]

Here you go , i used Gigabyte 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Gigabyte%...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

[bombaclat]

meh..PSU just died...will test tommorow and report..thanks

[1234s282]

(02-27-2010 09:27 PM)bombaclat Wrote:  meh..PSU just died...will test tommorow and report..thanks

Talk about bad timing!

Admin

[bombaclat]

[censored]..forgot to update..Seems to work fine.

Thanks again!