Bios Mods -The Best BIOS Update and Modification Source

Computer:
Aspire S7-391

BIOS Rev 3.7

The reason I want to get the "extra" settings is because I can’t change the raid setting (when I change it to AHCI, it changes back to RAID again?!?)+ I want to be able to change the efi settings, which I can’t at the moment.

- Bios download link:
http://global-download.acer.com/GDFiles/...&SC=EMEA_9

- Screenshots of the original bios setup menus:

[attachment=4997]
[attachment=4996]
[attachment=4995]
[attachment=4994]
[attachment=4993]

(02-10-2013, 02:18 AM)teddybear2 Wrote: [ -> ]Computer:
Aspire S7-391

BIOS Rev 3.7

The reason I want to get the "extra" settings is because I can’t change the raid setting (when I change it to AHCI, it changes back to RAID again?!?)+ I want to be able to change the efi settings, which I can’t at the moment.

- Bios download link:
http://global-download.acer.com/GDFiles/...&SC=EMEA_9

- Screenshots of the original bios setup menus:

When i try to use j-bios this is what i get:


I managed to extract all the files inside the bin file. So i attached setuputility i found in the extracted tolder.

(02-10-2013, 03:18 PM)teddybear2 Wrote: [ -> ]

(02-10-2013, 02:18 AM)teddybear2 Wrote: [ -> ]Computer:
Aspire S7-391

BIOS Rev 3.7

The reason I want to get the "extra" settings is because I can’t change the raid setting (when I change it to AHCI, it changes back to RAID again?!?)+ I want to be able to change the efi settings, which I can’t at the moment.

- Bios download link:
http://global-download.acer.com/GDFiles/...&SC=EMEA_9

- Screenshots of the original bios setup menus:

When i try to use j-bios this is what i get:

Code:

claus@ubuntu:~/Desktop/j-bios$ sudo python j-bios.py isflash.bin newbios.bin
[sudo] password for claus:
Opened BIOS 'isflash.bin' with md5:3290683d3df569f418e2a928507ddd33
Operating on BIOS isflash.bin size = 0x4728c0
Locating Firmware Volumes
Analysing Firmware Volume (may take a while!)
uncompLen: 0xc00010 (12582928)
Analysing Firmware Volume (may take a while!)
Traceback (most recent call last):
File "j-bios.py", line 2669, in <module>
main()
File "j-bios.py", line 2642, in main
bios = BIOS(infile)
File "j-bios.py", line 2338, in __init__
volumes = self.locate_firmware_volumes(0)
File "j-bios.py", line 2525, in locate_firmware_volumes
return [FirmwareVolume(index, pos, where) for pos in items]
File "j-bios.py", line 2157, in __init__
f = FFSFile(i, pos+offset, self.header.erasePolarity, self)
File "j-bios.py", line 2022, in __init__
s = FFSFileSection(i, pos+offset, self)
File "j-bios.py", line 1340, in __init__
self.subSections.append(FFSFileSection(self.uncompBufNum, 0, self))
File "j-bios.py", line 1776, in __init__
self.leafFV = FirmwareVolume(i, pos+offset-36, None, self)
File "j-bios.py", line 2157, in __init__
f = FFSFile(i, pos+offset, self.header.erasePolarity, self)
File "j-bios.py", line 2022, in __init__
s = FFSFileSection(i, pos+offset, self)
File "j-bios.py", line 1415, in __init__
stringtable = locate_stringtable(bb[i][start:end], verbose)
File "/home/claus/Desktop/j-bios/dumpsetup.py", line 82, in locate_stringtable
raise RuntimeError
RuntimeError

I managed to extract all the files inside the bin file. So i attached setuputility i found in the extracted tolder.

i have the same problem. some solution already?????

OH dear GOD....
Can any one help? This unlock will be very helpful!

(10-31-2013, 04:19 PM)dadaist Wrote: [ -> ]OH dear GOD....
Can any one help? This unlock will be very helpful!

I have the same laptop and I am having the same problem as you guys. This is not yet solved.

Have you tried to ask directly to the developer? (Jakob Heinemann). I am thinking on sending an email if you haven't done that yet.

By the way, I was taking a look to the python error and I think that is because it didn't find anything for our bioses.

Another thing, did you figure out by other ways which is the Recovery Name of BIOS needed for USB-Method in Acer Aspire S7-391?

Best regards

Recovery name is StormX64.fd

I've made a mod with Menus unlocked to be flashed by recovery.

https://hostr.co/k9iffIjO62oO

Report. Instructions inside.

(03-17-2014, 08:25 AM)fjfc Wrote: [ -> ]Recovery name is StormX64.fd

I've made a mod with Menus unlocked to be flashed by recovery.

https://hostr.co/k9iffIjO62oO

Report. Instructions inside.

Sorry fjfc, I don't know which BIOS version have you modified. Is 2.18 revision or the one that teddybear2 posted (2.13)?

Do you mind doing Menus unlocked over the following release? This one is newer than the original one posted by teddybear2 with better fan control.

The 2.18 version link is the following:
http://global-download.acer.com/GDFiles/...ER&SC=PA_6

By the way, thank you very much for your work.

(03-17-2014, 11:58 AM)Spinete Wrote: [ -> ]

(03-17-2014, 08:25 AM)fjfc Wrote: [ -> ]Recovery name is StormX64.fd

I've made a mod with Menus unlocked to be flashed by recovery.

https://hostr.co/k9iffIjO62oO

Report. Instructions inside.

Sorry fjfc, I don't know which BIOS version have you modified. Is 2.18 revision or the one that teddybear2 posted (2.13)?

Do you mind doing Menus unlocked over the following release? This one is newer than the original one posted by teddybear2 with better fan control.

The 2.18 version link is the following:
http://global-download.acer.com/GDFiles/...ER&SC=PA_6

By the way, thank you very much for your work.

Last one was 2.13.

For 2.18, here you go:

https://hostr.co/kh9JvWftmjj3

Report!

(03-17-2014, 12:15 PM)fjfc Wrote: [ -> ]

(03-17-2014, 11:58 AM)Spinete Wrote: [ -> ]

(03-17-2014, 08:25 AM)fjfc Wrote: [ -> ]Recovery name is StormX64.fd

I've made a mod with Menus unlocked to be flashed by recovery.

https://hostr.co/k9iffIjO62oO

Report. Instructions inside.

Sorry fjfc, I don't know which BIOS version have you modified. Is 2.18 revision or the one that teddybear2 posted (2.13)?

Do you mind doing Menus unlocked over the following release? This one is newer than the original one posted by teddybear2 with better fan control.

The 2.18 version link is the following:
http://global-download.acer.com/GDFiles/...ER&SC=PA_6

By the way, thank you very much for your work.

Last one was 2.13.

For 2.18, here you go:

https://hostr.co/kh9JvWftmjj3

Report!

Oh man, you are so fast! I really appreciate.
I will give you some feedback about how it is working and a donation will drop

Veyr nice

Regards