Forum RSS Feed Follow @ Twitter Follow @ Twitter

Thread Rating:
  • 2 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[REQUEST] Lenovo Z50-70 BIOS Unlock
#11
I don't understand as your result file say :

Intel ® Flash Programming Tool. Version: 9.5.14.1724
Copyright © 2007 - 2013, Intel Corporation. All rights reserved.

Platform: Intel® Premimum Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid

--- Flash Devices Found ---
W25Q64BV ID:0xEF4017 Size: 8192KB (65536Kb)

--- Flash Image Information --
Signature: VALID
Number of Flash Components: 1
Component 1 - 8192KB (65536Kb)
Regions:
Descriptor - Base: 0x000000, Limit: 0x000FFF
BIOS - Base: 0x400000, Limit: 0x7FFFFF
ME - Base: 0x001000, Limit: 0x3FFFFF
GbE - Not present
PDR - Not present
Master Region Access:
CPU/BIOS - ID: 0x0000, Read: 0x0B, Write: 0x0A
ME - ID: 0x0000, Read: 0x0D, Write: 0x0C
GbE - ID: 0x0118, Read: 0x08, Write: 0x08
Based on the Host Region FRACC the Host/CPU/BIOS has ( 0x00004A4B ) :
Read Write
Desc : Yes No
Host : Yes Yes
ME : No No
GbE : Yes Yes
PDR : No No

Total Accessable SPI Memory: 8192KB, Total Installed SPI Memory : 8192KB

FPT Operation Passed

Unpack .rar file and look result3.png and read info.txt !!!
So You have to use FPT 9.5.14.1724 and Svl7 Prr.exe tool to bypass Error 28 !!!

http://rghost.net/59280210

I uploaded here Original FPT 9.5.14.1724 folder so use It to copy all files from modified folder to USB Root place and then add too the bios.bin (Bios Mod) file and try again !
Disable SecureBoot Set Legacy Bios USB into Bios, Boot from USB and then run Flash.bat !!!
Let me know
Regards


P.S. I don't know what You are doing, but Results file say It have to work !

Your Brain . . . . It's the best tool U can use ! Wink
Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!!
Donate to me for my work, click here BDM
find
quote
#12
Hey,

Thanks, seems original files were not working so this worked, but I get the dreaded

Intel ® Flash Programming Tool. Version: 9.5.14.1724
Copyright © 2007 - 2013, Intel Corporation. All rights reserved.

Platform: Intel® Premimum Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid

--- Flash Devices Found ---
W25Q64BV ID:0xEF4017 Size: 8192KB (65536Kb)

PDR Region does not exist.
GBE Region does not exist.

Error 28: Protected Range Registers are currently set by BIOS, preventing flash
access.
Please contact the target system BIOS vendor for an option to disable Protected
Range Registers.

I tried
-prr.exe
-fpt -f bios.bin -bios

But no luck.

Booted into windows and tried
Microsoft Windows [Version 6.1.7601]
Copyright © 2009 Microsoft Corporation. All rights reserved.

C:\Users\cherry>cd modified
The system cannot find the path specified.

C:\Users\cherry>cd c:\modified

c:\modified>fptw -f bios.bin -bios

Intel ® Flash Programming Tool. Version: 9.5.14.1724
Copyright © 2007 - 2013, Intel Corporation. All rights reserved.

Platform: Intel® Premimum Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid

--- Flash Devices Found ---
W25Q64BV ID:0xEF4017 Size: 8192KB (65536Kb)

PDR Region does not exist.
GBE Region does not exist.

Error 28: Protected Range Registers are currently set by BIOS, preventing flash
access.
Please contact the target system BIOS vendor for an option to disable Protected
Range Registers.

c:\modified>


I guess I'm Ship out of luck other than SPI programmer? Smile
find
quote
#13
(11-26-2014, 12:30 PM)cherryghost Wrote: Hey,

Thanks, seems original files were not working so this worked, but I get the dreaded

Intel ® Flash Programming Tool. Version: 9.5.14.1724
Copyright © 2007 - 2013, Intel Corporation. All rights reserved.

Platform: Intel® Premimum Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid

--- Flash Devices Found ---
W25Q64BV ID:0xEF4017 Size: 8192KB (65536Kb)

PDR Region does not exist.
GBE Region does not exist.

Error 28: Protected Range Registers are currently set by BIOS, preventing flash
access.
Please contact the target system BIOS vendor for an option to disable Protected
Range Registers.

I tried
-prr.exe
-fpt -f bios.bin -bios

But no luck.

Booted into windows and tried
Microsoft Windows [Version 6.1.7601]
Copyright © 2009 Microsoft Corporation. All rights reserved.

C:\Users\cherry>cd modified
The system cannot find the path specified.

C:\Users\cherry>cd c:\modified

c:\modified>fptw -f bios.bin -bios

Intel ® Flash Programming Tool. Version: 9.5.14.1724
Copyright © 2007 - 2013, Intel Corporation. All rights reserved.

Platform: Intel® Premimum Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid

--- Flash Devices Found ---
W25Q64BV ID:0xEF4017 Size: 8192KB (65536Kb)

PDR Region does not exist.
GBE Region does not exist.

Error 28: Protected Range Registers are currently set by BIOS, preventing flash
access.
Please contact the target system BIOS vendor for an option to disable Protected
Range Registers.

c:\modified>


I guess I'm Ship out of luck other than SPI programmer? Smile

Yes my friend,
You need a SPI PGM look here :

https://www.bios-mods.com/forum/Thread-R...5#pid74575

Regards

Your Brain . . . . It's the best tool U can use ! Wink
Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!!
Donate to me for my work, click here BDM
find
quote
#14
Hopefully not hi-jacking this thread. I'm looking to flash this BIOS once my SPI PGM tools arrive.
Does this eliminate any whitelist as well open the advanced tab or just give access to various configs?

Also if someone would be kind enough to re up the modded bios?
Once I've got everything up and running I'll be sure to donate to ya BDMaster
find
quote
#15
(12-05-2014, 01:02 PM)stonetrap Wrote: Hopefully not hi-jacking this thread. I'm looking to flash this BIOS once my SPI PGM tools arrive.
Does this eliminate any whitelist as well open the advanced tab or just give access to various configs?

Also if someone would be kind enough to re up the modded bios?
Once I've got everything up and running I'll be sure to donate to ya BDMaster

Yes It is NWL + ADV , but We have to get FULL_DUMP file from your Eeprom :

GD25Q64    ID:0xC84017    Size: 8192KB (65536Kb)

So when You will get SPIPGM You have to read Eeprom and upload this file for me !
Regards

Your Brain . . . . It's the best tool U can use ! Wink
Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!!
Donate to me for my work, click here BDM
find
quote
#16
(12-05-2014, 07:01 PM)BDMaster Wrote: Yes It is NWL + ADV , but We have to get FULL_DUMP file from your Eeprom :

GD25Q64    ID:0xC84017    Size: 8192KB (65536Kb)

So when You will get SPIPGM You have to read Eeprom and upload this file for me !
Regards

That's great news, just to run through:
so I'll perform the EEPROM dump by identifying the GDS25Q64 by its marking.
Connecting with the CHA341A (I'll be using clips - my decent soldering iron isn't with me)
Dumping it to a second machine using the software provided with the CH341A
You'll kindly modify it
I flash the new file using the software I received with the CHA341A

I'll be doing this around the 15th Dec (those test clips take a while!)

There's an updated BIOS available now, any reason not to flash that and use it for this process other than the old 'ain't broke don't fix'?

Also PM Sent to you BDMaster
find
quote
#17
(12-05-2014, 09:13 PM)stonetrap Wrote:
(12-05-2014, 07:01 PM)BDMaster Wrote: Yes It is NWL + ADV , but We have to get FULL_DUMP file from your Eeprom :

GD25Q64    ID:0xC84017    Size: 8192KB (65536Kb)

So when You will get SPIPGM You have to read Eeprom and upload this file for me !
Regards

That's great news, just to run through:
so I'll perform the EEPROM dump by identifying the GDS25Q64 by its marking.
Connecting with the CHA341A (I'll be using clips - my decent soldering iron isn't with me)
Dumping it to a second machine using the software provided with the CH341A
You'll kindly modify it
I flash the new file using the software I received with the CHA341A

I'll be doing this around the 15th Dec (those test clips take a while!)

There's an updated BIOS available now, any reason not to flash that and use it for this process other than the old 'ain't broke don't fix'?

Also PM Sent to you BDMaster

I repled in PM !

Your Brain . . . . It's the best tool U can use ! Wink
Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!!
Donate to me for my work, click here BDM
find
quote
#18
WOO Finally got my Z50-70 Flashed to no whitelist and advanced options!!

So many thanks to BDMaster for this! All working perfectly at long last.

I can't say I can help mod the bios or the flash but if anyone needs any pointers locating the chip itself to flash or anything let me know!

For anyone interested I can provide a picture of the chip location. It's a little further away from the CPU and a lot closer to the Wi-Fi card than expected.

Also don't make the same mistake as I did with the CHA341a software. Follow the guide https://www.bios-mods.com/forum/Thread-R...?pid=74575

Particularly using the auto button rather than "write" or "program".
find
quote
#19
Hello Everyone,
I have a problem with my laptop bios and all i need is my lenovo Z50 70 bios file(*.ROM).
can anybody help me.

lenovo z50 70 bios file
find
quote
#20
Hi friend,
explain better your problem as I don't understand !
Which Bios .rom do you want ? Original file extracted ?
Let me know
Regards

Your Brain . . . . It's the best tool U can use ! Wink
Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!!
Donate to me for my work, click here BDM
find
quote


Forum Jump:


Users browsing this thread: 1 Guest(s)
Expand chat
Expand chat
Expand chat

To join us in the community live chat, please register or log-in