Forum RSS Feed Follow @ Twitter Follow @ Twitter

Thread Rating:
  • 10 Vote(s) - 3.8 Average
  • 1
  • 2
  • 3
  • 4
  • 5
unlock advanced menu lenovo y50-70
#41
ok i have see instruction in the file.thanks
what is Don't touch Video Settings or Disable Video Card It will Brick laptop
after bios mode i can t change video setting ?
find
quote
#42
Changing Video Settings or Disabling Video Cards Will produce a Brick !!!
Avoid to challeng the luck ! Or buy an HW SPI Programmer to write into
Eeprom Directly !
Regards

Your Brain . . . . It's the best tool U can use ! Wink
Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!!
Donate to me for my work, click here BDM
find
quote
#43
Hi Sir!
Could you unlock my BIOS please?
Thanks in advance, Dusan!
Results:https://www.sendspace.com/file/xd7l4t
BIOS Dump:https://www.sendspace.com/file/vkhqoh
find
quote
#44
Here You go :

http://rghost.net/7ShNYWDJx

let me know
Regards

Donate to me for my work and time . . . look into my Signature Wink

Your Brain . . . . It's the best tool U can use ! Wink
Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!!
Donate to me for my work, click here BDM
find
quote
#45
Could you please unlock my bios for me? Thanks in advance!!

Results:
https://www.sendspace.com/file/nbe82i

Bios Dump:
https://www.sendspace.com/file/gjaszc
find
quote
#46
Here You go :

http://rghost.net/6l5XWnL29

Let me know
Regards

Doante to em for my work and time . . . look into my Signature Wink

Your Brain . . . . It's the best tool U can use ! Wink
Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!!
Donate to me for my work, click here BDM
find
quote
#47
Thank you very much.
Will be donating by the end of the week Smile!
find
quote
#48
Hai BD Master,.. Hai everyone , whatsup ,,
been a while since i dropped by here,,

just wanna share this info on how to recover from soft brick Y50 , caused by changing Offset voltage in Unlocked BIOS. This was tested n confirmed by "Jarn06T" from NBR, at least I got this usefull info from him, n this method referred from those guys on AW forums , kudos to all of 'em.

Basically need to remove back cover , 12 screws, disconnect Battery , and CMOS connector. unplug all ram modules.
then do Power Flee by pressing power button 20 secs or so, ( this might not be necessary ).

Then connect AC , power on, it will bootloop cos no ram installed.
- in one of the shutdown in-between bootloop , quickly connect CMOS battery connector back in its place.. let it reboot , n it will shutdown again cos still no ram Installed.,
- after another shutdown ( still in-between bootloop ) quickly connect/insert 1 ram modules to its placed. then after next reboot it shud back to life to enter setup MODE. then u cud load default settings and restart or shutdown to connect battery & another ram modules, if you had 2 slots installed.

shud there is any other method pls do share , or if this was a repost , please do apologize.

hopefully this cud help others experiencing soft brick after changing OFFSET VOLTAGE settings. NOTE : do not change Voltage ( undervolt ) inside BIOS. ony do in WIndows environtment.
:cheers:

rgds,
find
quote
#49
Thumbs Up 
(02-03-2015, 05:05 AM)BDMaster Wrote: Here You go :

http://rghost.net/6l5XWnL29

Let me know
Regards

Doante to em for my work and time . . . look into my Signature Wink

Thanks for the fast response! I've flashed it and it works great. Thank you very much!!!!

Got error code 28: Protected range bla bla bla, but hit enter to continue and it did it's job!
find
quote
#50
Wink 
Hi,

I would like to request a bios unlock for a Lenovo y50-70.

Results.rar: https://www.sendspace.com/file/up11qg

BIOS rom:https://www.sendspace.com/file/15i4ue

I look forward to contributing to your efforts.

Thank you!
find
quote


Forum Jump:


Users browsing this thread: 1 Guest(s)
Expand chat
Expand chat
Expand chat

To join us in the community live chat, please register or log-in