Thanks for reply, BDMaster. I've already used this tool and uploaded the results in my last post. Anyway, here they are again
(11-28-2014, 08:57 AM)Saliskan Wrote: [ -> ]Thanks for reply, BDMaster. I've already used this tool and uploaded the results in my last post. Anyway, here they are again
Ok friend,
try this one :
http://rghost.net/59318434
let me know
Regards
P.S. if appreciate and want I continue Donate to me . . . Look into Signature
Thanks for your help, guys.
This is what I've done. I made a backup of bios and put the .rom file in winphlash tool, but it gave me - error 161. Should I try to flash with usb stick to bypass this error? Please forgive me if I made mistakes... I'm absolutely new to Bios mod world
(11-30-2014, 08:10 PM)Saliskan Wrote: [ -> ]Thanks for your help, guys.
This is what I've done. I made a backup of bios and put the .rom file in winphlash tool, but it gave me - error 161. Should I try to flash with usb stick to bypass this error? Please forgive me if I made mistakes... I'm absolutely new to Bios mod world
Hi friend,
which version You tried to flash ?
Regards
You're right, I didn't specify. I'm talking about flashing my original version, not the modified one.
(12-01-2014, 07:11 AM)Saliskan Wrote: [ -> ]You're right, I didn't specify. I'm talking about flashing my original version, not the modified one.
Let me know why You want to reflash your Bios Backup ?
You have two Bios Mod :
1. 84uj04us - 84ET23WW -
http://rghost.net/59318434
2. 84uj13us - 84ET30WW -
https://www.box.com/s/a72kjp3cmbiljpfeib6q
Which one You need
Regards
I downloaded the first file.
Inside there's this README.txt:
"!!!!! Flash from Windows with Included Flash Utility.
Flash Original bios (non modified) same version bios,
then, after reboot - flash modified one
(run setup.bat as administrator)."
From what's written in bold, I assume I have to flash my bios with same version bios. The problem is that lenovo offers his bios in .exe or .iso, so I made a backup of my bios with Universal Bios Backup and obtained a .rom file. I put this .rom file in winphlash64 and it gave me -error 161.
Of course I think I made mistakes, please tell me where. I'm so new to this world.
Thanks for your patience.
(12-01-2014, 11:10 AM)Saliskan Wrote: [ -> ]I downloaded the first file.
Inside there's this README.txt:
"!!!!! Flash from Windows with Included Flash Utility.
Flash Original bios (non modified) same version bios,
then, after reboot - flash modified one
(run setup.bat as administrator)."
From what's written in bold, I assume I have to flash my bios with same version bios. The problem is that lenovo offers his bios in .exe or .iso, so I made a backup of my bios with Universal Bios Backup and obtained a .rom file. I put this .rom file in winphlash64 and it gave me -error 161.
Of course I think I made mistakes, please tell me where. I'm so new to this world.
Thanks for your patience.
Ok friend,
Flash Original = Original Bios downloaded from Lenovo site = .exe !
So run the .exe file update your Bios (this is important only if your Bios version is different
than which You are Modding) if You have done before It's not necessary !
Then Re-Boot and flash Bios Mod using the CLI (Prompt Comand with Admin Rights) :
then, after reboot - flash modified one . . .
run setup.bat as administrator
So execute setup.bat (is a Dos Batch Comands Executing File) = when got C:\
write setup.bat (then hit enter)
I hope You understand now the procedure.
Let me know
Regards
Perfect, worked like a charm.
Thanks a lot BDMaster (and also thanks to Sovem).
BDMaster, are you italian?