(08-31-2014, 05:18 AM)Zolotorig Wrote: [ -> ]What I should do for success flash my BIOS?
My full error:
"--- Flash Devices Found ---
W25Q64BV ID:0xEF4017 Size: 8192KB (65536Kb)
W25Q32BV ID:0xEF4016 Size: 4096KB (32768Kb)
Error 104: The 2 SPI flash devices do not have..."
Ok friend,
It's Eeprom Definitions error, so open Fparts.txt get W25Q64BV and W25Q32BV and then where is wrote 0xC7 replace with 0x60 save and go !!!
I will make You sure It will work !!!
Regards
(09-11-2014, 11:32 AM)livelace Wrote: [ -> ]Hello, I have Lenovo B590.
Bios dump is http://rghost.net/57963663
Please, remove wifi white list.
Hi friend,
I want to start a New Way to pass Mods to users :
AutoMod
Using CodeRush Tool UEFIPatch + Patches.txt We can do the Mod by ourself, in any time and wherever We are !!!
Just use the right Patches.txt for the own Bios Version, so for H1ET75WW use this one !!!
How to use ? It's easy, just do a biosbackup.bin file and drag&drop on UEFIPatch.exe (the Patches.txt file has to be togheter at tool) It will reply with a file patched, then rename that file as bios.bin, put It into modified folder where are all rest tools to re-flash Bios Mod and copy all files from modified folder to an USB Dos Formatted Bootable Stick and Boot from USB !
Then at CLI Prompt Comand run flash.bat That's It all !
Here CodeRush Tool :
http://rghost.net/56830811
The Patches.txt file for H1ET75WW :
http://rghost.net/57966887
Here Modified folder with all tools to re-flash Bios Mod from USB, follow instructions :
http://rghost.net/56795507
I hope It will become the New Mod Way !!!
Let me know
regards
For error 104 You have to edt the Fparts.txt file and change 0xc7 value to 0x60 for the Eeproms Chips You have normaly
They are W25Q16BV and W25Q32BV but can do Others so You have to use the 1st tool I sent for Backup and You didn't use It.
P.S. here is your Bios Mod just done :
http://rghost.net/57966938
Very bad, but my computer was broken. Steps:
1. Place Patches.txt to UEFIPatch.exe folder.
2. UEFIPatch.exe bios_dump.rom
3. Place bios.rom to folder "Modified"
4. Boot to FreeDOS and start falsh.bat
5. I get error 104 and replace 0xc7 to 0x60
6. Boot again and start flash.bat
7. Flashing was done
8. After reboot my display show me nothing
9. After replace battery - computer can't start
Today I will compare your and my patched version of ROM.
(09-12-2014, 04:37 AM)livelace Wrote: [ -> ]Very bad, but my computer was broken. Steps:
1. Place Patches.txt to UEFIPatch.exe folder.
2. UEFIPatch.exe bios_dump.rom
3. Place bios.rom to folder "Modified"
4. Boot to FreeDOS and start falsh.bat
5. I get error 104 and replace 0xc7 to 0x60
6. Boot again and start flash.bat
7. Flashing was done
8. After reboot my display show me nothing
9. After replace battery - computer can't start
Today I will compare your and my patched version of ROM.
Ok friend,
if You got a problem flashing You have to consider to buy a cheaper SPIPGM to flash Eeprom using HW adapter.
let me know
Regards
(09-12-2014, 06:11 AM)BDMaster Wrote: [ -> ] (09-12-2014, 04:37 AM)livelace Wrote: [ -> ]Very bad, but my computer was broken. Steps:
1. Place Patches.txt to UEFIPatch.exe folder.
2. UEFIPatch.exe bios_dump.rom
3. Place bios.rom to folder "Modified"
4. Boot to FreeDOS and start falsh.bat
5. I get error 104 and replace 0xc7 to 0x60
6. Boot again and start flash.bat
7. Flashing was done
8. After reboot my display show me nothing
9. After replace battery - computer can't start
Today I will compare your and my patched version of ROM.
Ok friend,
if You got a problem flashing You have to consider to buy a cheaper SPIPGM to flash Eeprom using HW adapter.
let me know
Regards
Please, can You explain more detail, how I can flashing my BIOS ?
BIOS consists of two chips, and we do not know how to flash. We have two working programmer.
(09-18-2014, 04:31 AM)livelace Wrote: [ -> ] (09-12-2014, 06:11 AM)BDMaster Wrote: [ -> ] (09-12-2014, 04:37 AM)livelace Wrote: [ -> ]Very bad, but my computer was broken. Steps:
1. Place Patches.txt to UEFIPatch.exe folder.
2. UEFIPatch.exe bios_dump.rom
3. Place bios.rom to folder "Modified"
4. Boot to FreeDOS and start falsh.bat
5. I get error 104 and replace 0xc7 to 0x60
6. Boot again and start flash.bat
7. Flashing was done
8. After reboot my display show me nothing
9. After replace battery - computer can't start
Today I will compare your and my patched version of ROM.
Ok friend,
if You got a problem flashing You have to consider to buy a cheaper SPIPGM to flash Eeprom using HW adapter.
let me know
Regards
Please, can You explain more detail, how I can flashing my BIOS ?
BIOS consists of two chips, and we do not know how to flash. We have two working programmer.
Hi friend,
there are two Chips as one for Bios and one for EC so let me know which are these Chips and I will say what to do !
Regards
