Bios Mods -The Best BIOS Update and Modification Source

Full Version: [REQUEST] Acer Aspire 5741 (Z/G) BIOS Unlock
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3 4
Hi all, i have a laptop, Acer Aspire 5741G with i3 350m and Nvidia 320m...Angel

Now in using an updated bios flash from here, but the bios its not full unlock, just give me acess to a few new bios options.

Actual Bios version that i use: http://dl.dropbox.com/u/45117524/bios-mo...miloml.exe

I need to acess cpu, ram, graphics and fan advanced options!!! Confused


PLEASE HELP ME WITH THIS FULL UNLOCK!!!! ITS REALLY IMPORTANT GUYS!!! Big GrinBig GrinBig GrinBig Grin
HELP PLS!
(09-11-2013, 11:55 AM)icnn Wrote: [ -> ]HELP PLS!

......................
I need someone to make a BIOS for a Acer Aspire 5441G-5608 (insydeh20) that will allow me to force my CPU fan to always spin at max RPM.
Hello there,

I would like my bios modded so I can start my laptop up with the PE4L and a GPU (eGPU adapter).

Bios:
Direct download from Acer website, v1.23

What I would like:
My laptop works fine, but I have some trouble with it.
I have a PE4L and a GTX 560 TI, and when I insert the PE4L in the wifi card slot and start my laptop up, I have no screen and the laptop cuts it power off after 5 sec. This however didn't happen with the oldest bios I could find (Direct download from Acer website, v1.05). With v1.05 my laptop starts up but I have no screen, the laptop keeps on running.
I think that the laptop has a wifi whitelist (I don't have any other wifi card to test). The only way to do so is to boot my laptop, put it in sleep mode and then swap the wifi card with the PE4L. But, my laptop gets a BSOD with nvidias familiar nvlmkm.sys error and there is no way of fixing it besides I think the bios mod. This however doesn't happen with my r7 240 (no BSOD). I ran the same setup (PE4L with GTX 560 TI) on the Aspire 5536G and it worked perfectly fine, it could even boot with the PE4L inserted unlike my Aspire 5741.

Could somebody please mod this bios, I know there was a request 3 years ago for the Aspire 5741G (and yes, they share the same bios), I used that one, but it didn't fix my problem. I would like to give you that bios (because it has unlocked Advanced and Power tab), but the link doesn't work anymore.
I found the modded bios I used (and now flashed it succesfully)

https://mega.co.nz/#!Jx8VEDgL!JWU0PBbmg2...1_AEIc180o

This bios should be modded again so I could start my laptop up with the PE4L and the GPU.
Hey guys

PC model: Acer Aspire 5741G (4gb ram, 500gb hd, ati hd 5470)

I want to know if  there is a bios unlocked for my pc,
because I want to increase the fan speed and the original bios doesn't allow it.

 Moreover I want to know if there is a guide to unlock the original bios. (I'd like to learn how to do it!!)


current version bios: 1.23 acer bios

thank you all
Here You go :

http://rghost.net/8jxSy7WpG

let me know
regards

P.S. You can ask to MarcoMjet write to him a PM !
non credo che si possano regolare le ventole sul tuo bios... tramite rw magari.... se il tuo bisogno è quello solo di controllare le ventole questo bios ti è inutile anche se andando a toccare i valori riguardanti il thermal monitor potresti avere benefici, suppongo tu abbia un notebook che scalda tanto....
(11-10-2015, 05:04 AM)MarcoMjet Wrote: [ -> ]non credo che si possano regolare le ventole sul tuo bios... tramite rw magari.... se il tuo bisogno è quello solo di controllare le ventole questo bios ti è inutile anche se andando a toccare i valori riguardanti il thermal monitor potresti avere benefici, suppongo tu abbia un notebook che scalda tanto....

Capisco, beh si scalda molto se faccio lavorare la gpu (75/85 gradi).
Ormai ha 5 anni ma funziona alla grande a parte per la dissipazione del calore. 
Cambio la pasta termica ogni anno ma ormai non serve a molto, evidentemente il problema sta sotto i dissipatori a specchio.
Comunque vorrei provare a fare qualcosa sui thermal monitor, magari abbassando le soglie di temperatura, cosa ne pensi? come posso modificarli?
Riguardo RW a cosa ti riferivi ?
Grazie per il supporto
R
Pages: 1 2 3 4