it finished with error 25: The host cpu doesnt have write access to the target flash area
PDR Region does not exist
Thank you for the file, but some errors were on run
As I think both file in archive #2_mod.rar : 1.bin and 2.bin must be a little bit large than 1 byte.
as i saw in another slic archive for other laptop, 1.bin was 5 bytes and 2.bin 546 bytes and I think the 2.bin has the slic.
But I don't understand all the procedure which is done by that batch files.
Can you give me a link where that is described or explain how can I find that adddress for fptw utils
fptw -a 0x00A301D2 -f 1.BIN
fptw -a 0x00A301DE -f 2.BIN
here is the output of the fptw util
========================
Intel ® Flash Programming Tool. Version: 8.1.10.1286
Copyright © 2007 - 2012, Intel Corporation. All rights reserved.
Platform: Intel® HM77 Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid
--- Flash Devices Found ---
W25Q128BV ID:0xEF4018 Size: 16384KB (131072Kb)
PDR Region does not exist.
- Reading Flash [0xA31000] 4KB of 4KB - 100% complete.
- Erasing Flash Block [0xA31000] - 100% complete.
- Programming Flash [0xA31000] 4KB of 4KB - 100% complete.
- Verifying Flash [0xA301D3] 0KB of 0KB - 100% complete.
Error 204: Data verify mismatch found.
Intel ® Flash Programming Tool. Version: 8.1.10.1286
Copyright © 2007 - 2012, Intel Corporation. All rights reserved.
Platform: Intel® HM77 Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid
--- Flash Devices Found ---
W25Q128BV ID:0xEF4018 Size: 16384KB (131072Kb)
PDR Region does not exist.
- Reading Flash [0xA31000] 4KB of 4KB - 100% complete.
- Erasing Flash Block [0xA31000] - 100% complete.
- Programming Flash [0xA31000] 4KB of 4KB - 100% complete.
- Verifying Flash [0xA301DF] 0KB of 0KB - 100% complete.
Error 204: Data verify mismatch found.
Press any key to continue . . .
#2_mod.rar
step 1: unrar
step 2: run as admin x32.bat or x64.bat (this will change 1 bit info in bios, where consist slic data.)
(12-05-2014, 01:55 PM)sanboal Wrote: [ -> ]#2_mod.rar
step 1: unrar
step 2: run as admin x32.bat or x64.bat (this will change 1 bit info in bios, where consist slic data.)
I did that, but on restart I hadn't find slic. Is it possible that my bios have not slic inside?
I got the error.
Error 204: Data verify mismatch found.
As far as i understand that mean the tool not working good with Flash Device : W25Q128BV(FV)