Notebook Motherboard “Medion MAM2080”
Phoenix Bios
Slic table ?
Hello Mods,
I need a slice for the following bios 2.1 Table for Windows 7 starter.
if it is possible with a Medion Certificat.
http://rapidshare.com/files/334285694/SYS_BIOS.rar.html
it is an original Bios from Mitac for “Mitac 8615” (it is the same as MAM2080)
I hope once again for your help
Thanks to all
Moved to SLIC Requests - This isn't confirmed!
This is a Requirement with Each Phoenix/Insyde Mod Request .
How To Create An RW Everything Report
Download and Install RWEverything from one of the following links:
http://jacky5488.myweb.hinet.net/
http://jacky5488.myweb.hinet.net/bin/RwV1.4.zip
http://slics.myftp.org/Tools/RwV1.4.rar
Open RWEverything.
After RWEverything Opens, click ACCESS - ACPI Tables.
When ACPI Tables opens, click anywhere within the ACPI Window.
Now click CONTROL + F2 to save the entire table.
Save this Report to the desktop WITHOUT CHANGING THE NAME and either attach this file to
your post or upload it to one of the following:
http://www.box.net or
http://www.mediafire.com or
http://www.sendspace.com
If you upload your RWEverything Report to one of the 3 host servers above, post the download link of
your RWEverthing Report in the Post of your Mod Request.
Below is the preferred method in which to post your mod requests:
-Manufacturer:
-Motherboard Model:
-Bios revision:
-Bios Type:
-Bios Download Link:
-RW Everything Report Download Link:
Regards
Admin
Here you go , i used Medion 2.1 SLIC + Certificate Included:-
1. Copy and paste ******.XRM-MS certificate file into C-Drive.
2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.
3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.
4. After receiving the message that the license was installed successfully, type at the command prompt:
slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.
5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.
http://dl.dropbox.com/u/747181/Medion%20...34s282.zip
Flash at your own risk!
Please Report Back With Whether It Worked Or Not!
Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work
Regards
Admin
thanks, it works fine............
