(05-20-2014, 01:02 AM)judeh101 Wrote: [ -> ] (05-09-2014, 06:33 PM)tonma Wrote: [ -> ] (05-08-2014, 10:45 PM)chronos86 Wrote: [ -> ]Thanks, Tonma what is the procedure to change BCCC2028-B8FF-4132-A532-C212CACB55B3_1618.ROM in the main bios? It's easy?
Anyway this is my modded bios backup if needed for modify with the .ROM http://rghost.net/55035965
This mod is only for you chronos86, only vbios changed:
http://rghost.net/55060342
Hey tonma or bdmaster,
How would I insert all the modules into the bios with phoenixtool? I have the bios that bdmaster sent me a long time ago.
I need help inserting these modules:
8DFAE5D4-B50E-4C10-96E6-F2C266CACBB6_1594.ROM
BCCC2028-B8FF-4132-A532-C212CACB55B3_1618.ROM
PADDING_2096.ROM
7755CA7B-CA8F-43C5-889B-E1F59A93D575_180.ROM
I have my backup bios file here if you can help me out please 
http://rghost.net/55423418
I can't thank you guys enough for your hard work and help!!
Hi friend,
You can do It by yourself :
How to reinsert Modded Modules in a Bios :
0. Get PMTool 2.54 here :
http://forums.mydigitallife.info/threads...EFI-BIOSes
1. Copy Bios File Biosname.fd into a Temp folder (working folder) and start to modify
2. Open by PMTool Bios file get DUMP folder with all Bios Modules into
3. Set PMTool options Advanced "Allow User to Modify Other Modules" + "No SLIC"
3. Click "GO" and wait for message "You can now make manual alterations . . ."
4. Copy Modded Modules (Same GUIDs) into DUMP folder and check that anyone has to be replaced to original
5. Click "OK" to alert and wait to finish SLIC MOD (It's a way to replace modules without do a Slic mod)
6. When the Result is "SLIC Performed successfuly. . . .) press Ok and rename Biosname_SLIC.fd to original
7. Replace to original Bios the Modded One.
To complete this operation It needs your Bios File and Modules to replace too, so if You uploaded only Bios I don't compete that as missed Modules You want to replace.
But I think You can do It,so try and Let me know
Regards
(05-20-2014, 01:21 AM)BDMaster Wrote: [ -> ] (05-20-2014, 01:02 AM)judeh101 Wrote: [ -> ] (05-09-2014, 06:33 PM)tonma Wrote: [ -> ] (05-08-2014, 10:45 PM)chronos86 Wrote: [ -> ]Thanks, Tonma what is the procedure to change BCCC2028-B8FF-4132-A532-C212CACB55B3_1618.ROM in the main bios? It's easy?
Anyway this is my modded bios backup if needed for modify with the .ROM http://rghost.net/55035965
This mod is only for you chronos86, only vbios changed:
http://rghost.net/55060342
Hey tonma or bdmaster,
How would I insert all the modules into the bios with phoenixtool? I have the bios that bdmaster sent me a long time ago.
I need help inserting these modules:
8DFAE5D4-B50E-4C10-96E6-F2C266CACBB6_1594.ROM
BCCC2028-B8FF-4132-A532-C212CACB55B3_1618.ROM
PADDING_2096.ROM
7755CA7B-CA8F-43C5-889B-E1F59A93D575_180.ROM
I have my backup bios file here if you can help me out please
http://rghost.net/55423418
I can't thank you guys enough for your hard work and help!!
Hi friend,
You can do It by yourself :
How to reinsert Modded Modules in a Bios :
0. Get PMTool 2.54 here : http://forums.mydigitallife.info/threads...EFI-BIOSes
1. Copy Bios File Biosname.fd into a Temp folder (working folder) and start to modify
2. Open by PMTool Bios file get DUMP folder with all Bios Modules into
3. Set PMTool options Advanced "Allow User to Modify Other Modules" + "No SLIC"
3. Click "GO" and wait for message "You can now make manual alterations . . ."
4. Copy Modded Modules (Same GUIDs) into DUMP folder and check that anyone has to be replaced to original
5. Click "OK" to alert and wait to finish SLIC MOD (It's a way to replace modules without do a Slic mod)
6. When the Result is "SLIC Performed successfuly. . . .) press Ok and rename Biosname_SLIC.fd to original
7. Replace to original Bios the Modded One.
To complete this operation It needs your Bios File and Modules to replace too, so if You uploaded only Bios I don't compete that as missed Modules You want to replace.
But I think You can do It,so try and Let me know
Regards
Hey BDMaster, it has been a long time man, how are you?
You have taught me a lot, but now..
Everything is going quite smooth until... it gives me this message "Submodule to be inserted has invalid common header" which I'm not quite sure what that means haha.
I don't know which one of your modules is broken so You have to try It How ?
You have to make the mod for every module involved.
If there are 10 modules You have to do for every module the mod and when It will give the error message You'll find the broken module.
Then to correct the that module You have to use an Hex Editor and redo the modifies !
The module You can copy from DUMP folder and then modify to get the new one !
Then redo the operation for all modules togheter !
I hope You'll learned How To and the Know How to get Bios Modded !
let me know
Regards
(05-20-2014, 02:34 AM)BDMaster Wrote: [ -> ]I don't know which one of your modules is broken so You have to try It How ?
You have to make the mod for every module involved.
If there are 10 modules You have to do for every module the mod and when It will give the error message You'll find the broken module.
Then to correct the that module You have to use an Hex Editor and redo the modifies !
The module You can copy from DUMP folder and then modify to get the new one !
Then redo the operation for all modules togheter !
I hope You'll learned How To and the Know How to get Bios Modded !
let me know
Regards
haha.. I'm not that advanced yet, i'm really stuck on this one. i'm usually smart and understand things right away, but this is a bit much for me to understand on my own
Hi all,
I have successfully modded my 1.13 BIOS some time ago. I used tonma's method and got advanced and power tabs working.
Since the new 1.15 BIOS is out, I would like upgrade and add tonma's CPU and video modules, but what is the situation with advanced and power tabs? Where are the modules for them? Or should I use the ones from 1.13 version?
Please, clarify
Advanced menu module for 1.15 FE3542FE-C1D3-4EF8-657C-8048606FF670_857.ROM:
http://rghost.net/56356133
Enjoy!
Pd.: I'm also testing vbios for 760M overclocked to 928 Mhz GPU Turbo and 4900 Mhz DDR5 memory, I'll post it when test end.
Need help.. Want to unlock my bios and overclock GPU, but all of the links to rghost.net don't work, and the forum link for pmtool also doesn't work.
Hello BDMaster, Hello all,
I want to buy an Acer Aspire V3-772G-747a162TMamm, FHD, Procesor Intel® Core™ i7-4702MQ 2.2GHz Haswell, 16GB, 1TB+1TB, GeForce GTX 760M 2GB .
BUt I need it for Virtualization purposes , and I understand that VT-x is disabled in BIOS.
I see the latest BIOS version is 1.15. Can you please confirm that I will be able to Flash a modified BIOS version that will allow me to enable VT-x ? Maybe even with Advanced tab , but what I really need is VT-x ?
Thank you very much . Based on your answer , I will decide to buy this laptop.
Have a great day !
Hello friends,
can i use this latest Links (Bios/Files) to unlock my Bios ?
-Aspire v3 722G-GTX760M-
BIOS Version 1.15