Bios Mods -The Best BIOS Update and Modification Source

Hello everyone


I recieved my programmer today its a USBasp USBISP 3.3V / 5V AVR Programmer USB ATMEGA8 betemcu version 2.0


but the pin layout is 10 and soic 8 is 8 pin how to rewire to make it flash


this is the layout of the asp



this is layout of soic





already thanx

Hello to everybody, i have a big problem with my bios, months ago i had flashed the unlocked tolstyluky bios to my laptop but on december 2015 i had the fantastic(bad) idea to change the maxium shared video memory to maxium value and after that computers enter on bootloops.

I had done several times and with diferent memories the emergency bios recovery and nothing happen, the pc never turn off or read memory(led dont blinks)

Then i had buy an SPI programmer and can extract a bios Dump that i attach, i had unsoldered the chip and put cables on mainboard to an adapter, this way i can test several times with any fix you can help me and let you know.

Hope that somebody can help because i had done some "inventions" and nothing Works

here is the file [attachment=10601]

Thanks

PD: My laptop is the model with NVIDIA 710M video chip

Hi hope someone can help me. I bricked my Acer V3-571 laptop and can't seem to unbrick it. I am unsure what exactly to do ? I have tried to reflash Unlocked bios 2.21 , 2.04 , 1.13 , 1.11 etc. even tried reflashing default bios but I am out of luck ( used the Fn + Esc  crisis flash method). (I bricked it by changing the Advanced memory settings for  the graphics)

I did format the usb to FAT32 (tried FAT16 as well)
Copied the Q5WV1X64.fd file to the usb
Unplugged the battery + ac cord
hold Power key for 30 secs
Insert usb stick
Hold Fn + Esc
Plug in Ac cord , power on laptop
Then nothing happens am I missing a file or something?

Anyone??

Your are right, filename must be Q5WV1X64.fd.
But keys combo may be: Fn+F, Fn+B, Fn+Esc, Win+F, Win+B, Ctrl+Home, Ctrl+Esc

(05-17-2016, 06:06 AM)Stoofie Wrote: [ -> ]Hi hope someone can help me. I bricked my Acer V3-571 laptop and can't seem to unbrick it. I am unsure what exactly to do ? I have tried to reflash Unlocked bios 2.21 , 2.04 , 1.13 , 1.11 etc. even tried reflashing default bios but I am out of luck ( used the Fn + Esc  crisis flash method). (I bricked it by changing the Advanced memory settings for  the graphics)

I did format the usb to FAT32 (tried FAT16 as well)
Copied the Q5WV1X64.fd file to the usb
Unplugged the battery + ac cord
hold Power key for 30 secs
Insert usb stick
Hold Fn + Esc
Plug in Ac cord , power on laptop
Then nothing happens am I missing a file or something?

First of all, remove mobo's cell for a few seconds (10s) and put back again, after that repeat your procedere!

Tried that doesnt work..any othee help please people

Anyone who can help ? I have the same problem.

@Stoofie on my laptop the usb port are not working after the bios update that's because it can't flash the new one,
I think your notebook has the same problem

Me too. Anyone help plssss

I tried to update my device from 1.13 to 2.17 through a forced update. Now it's bricked. I tried to flash some .fd but it just stays on with the fan spinning and doesn't flash at all.

I would gladly pay $20 or even more to anyone who helps me solving it.