(05-03-2014, 11:02 AM)felipejfc Wrote: [ -> ]try this mod
http://dl.felipejfc.com/bios%20mods/no%2...IPEJFC.zip
report
thank you very much ; my problem solved by this method :
from the original package ther is 2 .ini files we are going to edit parameters :
- platform.ini
- unvs .ini
i have found :
- password=0 ; changed to password=1
- clearcmos=0 ; changed to clearcmos=1
- checkversion=1 ; changed to checkversion=0 (in order to flash the bios under windows without cheking version an tell me it is not possible bcz version are the same :-) )
saving and launching insydeflash.exe.
---------------------
by the way ; your bios flash files can mod my bios ? and can i change graphic card or proessor ?
but !!!!!!!
Model and serial number changed after fflashing bios from :
FROM : Qosmio x870-psplze TO : satellite P870-PSPLAC
SERIAL NUMBER :
FROM : 5D274034Q TO : 00000000000000000000000000000000
i reflashed the bios from official and non modified file but problem not solved
how i do recover my model and serial number please ?
Flashing the backup I sent may fix this.
Report
(05-05-2014, 09:29 AM)felipejfc Wrote: [ -> ]Flashing the backup I sent may fix this.
Report
thanx very much for your generousity and helps you do for all memberS.
i will try and post result tomorrow inchaa ALLAH.
(05-05-2014, 09:29 AM)felipejfc Wrote: [ -> ]Flashing the backup I sent may fix this.
Report
same thing : wrong model and serial number + one bit problem : after flashing bios @ the startup apeare a message error : "Fatal error: One or more table pointers are invalid. Modification could be unsafe... Press any key to continue boot"
but solved by doing this :
* Booting up the PC from Windows installation disk
* Pressing and holding SHIFT and then pressing F10
* Input "bootsect.exe /nt60 SYS /force"
* Restart the PC
how can i reflash my bios with my first backup i think should restore model and serial after that i can reflash with your file.
bios flashed with backup ; model and serial solved but password remain
flashed with your bios posted password cleared but model and serial are wrong :-(
thank you very much felipejfc
just solve it now using hex editor by copy and past data name from old bios backup to the new one
can i upgrade graphic card or proessor ?