08-04-2014, 04:20 AM
hey everyone,
Im having issues with my Acer aspire s3 951. I have the latest official bios 1.18 (insydeH20 rev 3.5).
The problem is the fan control is always on 100% full speed or completely off if its under 40 degrees Celsius. There is no in between speeds, it seems like there is to much voltage going to the fan all the time so every time the fan is suppose to activate at say 10% its really spinning at 100%.
I tried a few programs but they only helped when the fan would turn on eg i could change it turn on at 70 degrees. But its still either off or on 100% even though programs says the fans at 20% or whatever.
So i was hoping there was bios version to fix this issue or that gave me control over fan settings?
Details:
-Motherboard Manufacturer and Model : Acer Aspire S3-951-2634G25nss
-Bios Revision : 1.18
-Bios Type : InsydeH2O
-Bios SLIC :
-Bios Link : http://global-download.acer.com/GDFiles/...50038819&S tep1=ULTRA-THIN&Step2=ASPIRE&Step3=ASPIRE%20S3-951&OS=ALL&LC=en&BC=ACER&SC=EMEA_27
thanks everyone
Im having issues with my Acer aspire s3 951. I have the latest official bios 1.18 (insydeH20 rev 3.5).
The problem is the fan control is always on 100% full speed or completely off if its under 40 degrees Celsius. There is no in between speeds, it seems like there is to much voltage going to the fan all the time so every time the fan is suppose to activate at say 10% its really spinning at 100%.
I tried a few programs but they only helped when the fan would turn on eg i could change it turn on at 70 degrees. But its still either off or on 100% even though programs says the fans at 20% or whatever.
So i was hoping there was bios version to fix this issue or that gave me control over fan settings?
Details:
-Motherboard Manufacturer and Model : Acer Aspire S3-951-2634G25nss
-Bios Revision : 1.18
-Bios Type : InsydeH2O
-Bios SLIC :
-Bios Link : http://global-download.acer.com/GDFiles/...50038819&S tep1=ULTRA-THIN&Step2=ASPIRE&Step3=ASPIRE%20S3-951&OS=ALL&LC=en&BC=ACER&SC=EMEA_27
thanks everyone