Is it possible to insert a Slic 2.1 into this bios? I think it may be an Acer one I need now but not sure
Manufacturer: Packard Bell BV
Motherboard Name: MSI MS-7301 (Packard Bell OEM)
BIOS Version: PT890 W7301VP2 V3.16 092807 14:49:25
BIOS Type: Award
Award BIOS Type: Phoenix - AwardBIOS v6.00PG
Vendor: Phoenix Technologies, LTD
Bios Download Link:
http://support.packardbell.com/uk/item/i...m=download&i=6998840600;Cuba_BIOS_316.exe;0;;
Thanks in advance
Here you go , unlocked overclocking options , lots of advanced settings hidden and Acer 2.1 SLIC + Certificate Included:-
1. Copy and paste ******.XRM-MS certificate file into C-Drive.
2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.
3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.
4. After receiving the message that the license was installed successfully, type at the command prompt:
slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.
5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.
http://dl.dropbox.com/u/747181/Packard%2...34s282.zip
Flash at your own risk!
Please Report Back With Whether It Worked Or Not!
Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work
Regards
Admin
Really thanks for your work admin, i'm searching for this unlocked bios for 2 months! Can you give me some tips on how to flash this bios to my pc?... like the Command line to prompt
thanks!
EDIT: I succeed in the install, now it works well. But i cannot find the overcloking options for the cpu, there's many regarding the ram, but for the cpu are read-only. I attached some screen
Unless I misunderstand the purpose of this BIOS mod, this should enable SLI on a non-SLI Certified board but should not effect the board's ability to overclock CPU's or RAM.
Edit:
Re-read admin's post... clearly this was was more than just a SLIC Mod!
Edit#2:
Did some more searching, apparently the SLIC segment is used for a few different things... the obvious being W7 Activation as well as SLI Certification.
(04-08-2010, 05:05 PM)eskaryo Wrote: [ -> ]Unless I misunderstand the purpose of this BIOS mod, this should enable SLI on a non-SLI Certified board but should not effect the board's ability to overclock CPU's or RAM.
Edit:
Re-read admin's post... clearly this was was more than just a SLIC Mod!
Edit#2:
Did some more searching, apparently the SLIC segment is used for a few different things... the obvious being W7 Activation as well as SLI Certification.
Once again , you seem to have gotten SLI and SLIC mixed up!
This mod is for SLIC. It has nothing to do with enabling SLI on non-SLI certified boards
Regards
Admin
Yea.. used this mod prevalently for the overlocking options... so if i need support for this mod i should post in the unlocking section? ..
(04-10-2010, 09:31 AM)onezell Wrote: [ -> ]Yea.. used this mod prevalently for the overlocking options... so if i need support for this mod i should post in the unlocking section? ..
Correct
Sorry about the inconvenience
Admin
(04-11-2010, 07:19 AM)1234s282 Wrote: [ -> ] (04-10-2010, 09:31 AM)onezell Wrote: [ -> ]Yea.. used this mod prevalently for the overlocking options... so if i need support for this mod i should post in the unlocking section? ..
Correct
Sorry about the inconvenience
Admin
THanks for your help
posted in the right section.
http://www.bios-mods.com/forum/Thread-Un...si-MS-7301