(03-18-2016, 04:34 AM)DeathBringer Wrote: [ -> ]Can you don't press F1 to save configuration and boot from USB stick with DOS?
Or press F10 enter to BIOS and "Save and Exit"?
Did you clear CMOS before installing X3363?
Yes. I clear CMOS by button on M/B.
There is no any options, only F1. BIOS and boot menu not available until mem check not finished. I tried inject microcodes in EEPROM with CH341A, but it give no effect, same symptoms. Maybe i did something wrong.
OK. Download
this file and extract all files into bootable USB stick with DOS.
Install old CPU, boot from USB stick with DOS and run
FlashBin.exe.
Reboot and make BIOS backup by
Universal BIOS Backup ToolKit 2.0. I need to see it.
Download
another file and extract all files into bootable USB stick with DOS.
Boot from USB stick with DOS and run
FlashBin.exe.
Reboot and make BIOS backup again.
Bad news. Can you use Recovery mode?
(03-18-2016, 10:39 AM)DeathBringer Wrote: [ -> ]Bad news. Can you use Recovery mode?
Yep. I did it. What next?
Give me some time to research this BIOS.
Can you read BIOS by CH341A and write with mod?
The mod I'll make.
Please do with old CPU:
1. Download and flash
BIOS 1.28
2. Flash my previous patch:
(03-18-2016, 07:44 AM)DeathBringer Wrote: [ -> ]Download this file and extract all files into bootable USB stick with DOS.
Install old CPU, boot from USB stick with DOS and run FlashBin.exe.
3. Reboot and make BIOS backup again.