Bios Mods -The Best BIOS Update and Modification Source

Full Version: [REQUEST] NV52L06u A10-5750m Microcode addition
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
[REQUEST] NV52L06u A10-5750m Microcode addition and Menu Unlocks
Just picked up a near pristine NV52L06u to use as a primary laptop. Had an A10-5750M on hand from a prior unit, and wanted to put it in. The socket supports it, it's the same TDP as the A6-4400M in it, and the NV52L has a sub model w/ the A10-4600m, so I figured it'd work. I was wrong. Sys powers up and illuminates the screen, interacts w/ the HDD too, but no full POST. Fan goes to max after a short bit too. From reading other posts, seems the CPU just isn't compatible w/ the firmware. Tested the a6-4400m again, and all is well, so I didn't damage anything. I'd like to be able to mess w/ RAM settings and such as well since I have 2x4GB low latency DDR3 1866 RAM, which I've already confirmed as working w/ the A6.

Gateway NV52L06u

AMD A10-5750m 610F31h

latest non-full UEFI BIOS: http://global-download.gateway.com/GDFil...Y&SC=PA_6G

note: you have to extract the .exe, then run 7zip or winRAR on the .exe to get the .fd file which is 4096kb.

Sorry I don't have screenshots of the BIOS, didn't take the time to pull the A10 for a 2nd time, and figure I'll use the recovery procedure if I'm able to get a modded BIOS.

There's a modded v 2.14 BIOS for the V3-551G which appears to use the same BIOS, but it does not have the microcode for the A10-5750m integrated. I got that bios from: https://drive.google.com/file/d/0B9CekGW...E3SVE/edit
Can confirm it doesn't make the 5750m POST, haven't tried it w/ the stock A6-4400m


Thank you
I GOT YOU ALL !!!! MUHAHAHAHAH, THE ASWER IS SIMPLE GUESST WHAT , A-10 5750 ONLY POST IN UEFI MODE !!!! hahahahaha!
maxbiosmod
Make and post screenshots of first (CPU) and third (Mainboard) tabs of CPU-Z with upgrade result.
(05-10-2016, 02:01 PM)DeathBringer Wrote: [ -> ]maxbiosmod
Make and post screenshots of first (CPU) and third (Mainboard) tabs of CPU-Z with upgrade result.

i didnt manage to intall somewhat in uefi....


mobo plcsc8 (tosh c870d)
k15 imc/amd 08 fch

i finally done it...

[attachment=10725][attachment=10728]
[attachment=10726][attachment=10727]
I do not understand if you have a bios of 4 mb or 2 mb or you have enabled the support of the UEFI in the settings?