Bios Mods -The Best BIOS Update and Modification Source

Full Version: Biostar TForce 6100-939 070803 HP 2.1 SLIC
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Biostar - TForce 6100-939

BIOS 070803

Bios Type: Award/Phoneix

Bios Rev: CU51M811.BST

http://www.biostar.com.tw/upload/Bios/CU51M811.BST

Can someone mod this bios for SLIC 2.1, maybe for HP type?

Thanks!
Here you go , i used HP 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Biostar%2...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin
(03-18-2010, 12:05 AM)1234s282 Wrote: [ -> ]Here you go , i used HP 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Biostar%2...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

Yes, thank you very much!

It works perfectly! No isues!
(03-18-2010, 12:05 AM)1234s282 Wrote: [ -> ]Here you go , i used HP 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Biostar%2...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin
Hi Admin,
I can't download the zip file. Could you please help me for that?
I can confirm that the download link is active and working?

Try again if not il upload a mirror

Admin
(01-16-2011, 06:10 AM)1234s282 Wrote: [ -> ]I can confirm that the download link is active and working?

Try again if not il upload a mirror

Admin

I still can't access the link.
Could you please upload it as an attachment?
Hi Admin,
I happened to see a link like this http://files.getdropbox.com/u/747181/Biostar%20Tpower%20I45%20HP%202.1%20SLIC%20By%201234s282.zip.
I could download this.
Because of security issue, I can't download files such as http://dl.dropbox.com/...
So I changed the link what I wanted to download to http://files.getdropbox.com/u/747181/Bio...34s282.zip.

Did I download the same one?
(01-19-2011, 06:22 AM)1234s282 Wrote: [ -> ]http://dl.dropbox.com/u/747181/Biostar%2...34s282.zip

I used a proxy to download it. Thanks.