(03-29-2010, 12:35 AM)1234s282 Wrote: [ -> ]sorry for the delay , was waiting for my megaupload limit to reset 
Managed to unlock Overclocking , PNP Pci Config , More PC Health Options and some other things!
Flash at your own risk!
http://dl.dropbox.com/u/747181/Gateway%2...34s282.zip
Regards
Admin
sorry to bump this old thread, but it relates to my issue.
I tried this modified bios on my Gateway DX4831. After flashing upon first power on, it shows the make as "Acer" with the company logo underneath. It goes into bootup mode and I can enter the bios. Upon entering the bios I see the added overclocking features, but the ability to edit the BCLK is not there.
It shows the BCLK (it's grey'ed out) in the top with other summary information (CPU multiplier, BCLK, etc)..
The first adjustable setting is the CPU multiplier which you can change (from 9-22) so obviously you'd want it at the default 22... but with no ability to adjust the BCLK (FSB) it's in essence useless for overclocking..
The other settings like turbo mode, etc. ARE adjustable.. Is there no way to edit/adjust the BCLK in this settings window?
Thanks!
Sorry but we unlock all we can
- You have new options but thats all we can do
We would appreciate some screenshots
to update the post.
Thanks
Admin
my Gateway DX4831-01E Shows Up In The BIOS As "Acer Aspire M5811" i want to edit the model string so that the driver update tool that came with my computer will get the right drivers
can you guys change that?
and it is dangerous to edit the model string?
the BIOS you guys modded for me are located here
http://dl.dropbox.com/u/747181/Gateway%2...34s282.zip
and while your at it could you make sure it supports all intel i5 and i7 cpus?
thanks
Whoah! hang on a minute
I think i5 and i7 support is unlikely because the chips use a completely different socket (LGA1156) instead of the older LGA775 that Core 2 CPU's take. What CPU is currently in the machine?
And yes editing the model number is very dangerous , your taking the risk of reflashing the bios just to get the right drivers? Always get them direct from the hardware manufacturer because this ensures you have the latest. If your missing a few use Device Doctor.
Admin
(12-01-2010, 04:08 AM)1234s282 Wrote: [ -> ]Whoah! hang on a minute I think i5 and i7 support is unlikely because the chips use a completely different socket (LGA1156) instead of the older LGA775 that Core 2 CPU's take. What CPU is currently in the machine?
And yes editing the model number is very dangerous , your taking the risk of reflashing the bios just to get the right drivers? Always get them direct from the hardware manufacturer because this ensures you have the latest. If your missing a few use Device Doctor.
Admin
i have an Intel H57 chipset and an Intel i3 CPU so it certainly is possible
Oh right well perhaps it might be possible
Never say definately! I thought your system was older than it is!
Gateway has no official bios download for this model but fortunately i have a backup!
Will see what i can do!
theres also a link here
http://www.megaupload.com/?d=ATT0L4G0
if you could basically copy out the serial number and Gateway Model Number Would Be awesome
OH AND CAN YOU FIX THE ACER BOOT LOGO AND CHANGE IT TO THE GATEWAY LOGO?
sorry thought i should get it all done in one shot
and thanks again for all the help!
ILL BE SURE TO FLASH FROM USB DRIVE!!!!!!!!!
no effence,
but is there a way to VERIFy that this rom is good?
im kinda scarred about the whole six months without the computer thing