Hey BDMaster,
unfortunately PHLASH shows "Invalid Flashint.Bin".
Any Idea?
Regards
(12-28-2014, 09:59 AM)Cookie667 Wrote: [ -> ]Hey BDMaster,
unfortunately PHLASH shows "Invalid Flashint.Bin".
Any Idea?
Regards
Have You flashed It from USB in Dos Mode ?
Use Rufus to prepare an USB Dos Fat32 Bootable then copy into files :
http://rufus.akeo.ie/?locale=en_US
All files from folder MODBIOS have to be copied int USB root place, so
when Boot from USB, atoexec.bat will execute and Bios Flashed by
PH161700.EXE !!!
Let me know
Regards
P.S. if You have SecureBoot Disble It and Set Legacy Bios USB
Prepared USB-Drive exactly as you told.
Notebook boots up from USB and PHLASH is automatically started by Autoexec.bat.
But I still get the same error mentioned above.
(12-28-2014, 01:14 PM)Cookie667 Wrote: [ -> ]Prepared USB-Drive exactly as you told.
Notebook boots up from USB and PHLASH is automatically started by Autoexec.bat.
But I still get the same error mentioned above.
Hi friend,
So flashing from Dos You got that error same way while trng to run PH161700.EXE ?
I wrote PH161700.EXE and You PHLASH, It seems as You are using Original tool with
modified file !
I said copy all files from MOD folder into USB :
autoexec.bat
PH161700.EXE
SLIC.JPG
SLIC.ROM
Now Autoexec.bat will execute this batch comand :
ph161700 /X /FORCE /O /C /S SLIC.ROM
So this comand You can run manualy too and Phlash17 is different than PHLASH.EXE !!!
You can use It from Windows too, but from Dos is more healty !
Let me know, what You have done precisely !
Then use this tool run It as Admin and upload here the result file :
http://rghost.net/58219938
let me know
Reagrds
Hi BDMaster,
thanks for your help.
Of course I used the PH161700.EXE you provided (that's what I called "PHLASH") - sorry if that was confusing.
Made the USB-Drive bootable with Rufus (FAT32 / FreeDOS) and copied the files from MODBIOS to USB root.
Like I said, boots up from USB nicely and starts flashing SLIC.ROM, but then quits with "Invalid Flashint.Bin" error.
Even tried flashing with WinPhlash 1.7, doesn't work either but shows the error:
"Corrupted interface descriptors in the new BIOS file.
Part Table Signature no found in the Interface.
Error code:-161"
(12-28-2014, 07:37 PM)Cookie667 Wrote: [ -> ]Hi BDMaster,
thanks for your help.
Of course I used the PH161700.EXE you provided (that's what I called "PHLASH") - sorry if that was confusing.
Made the USB-Drive bootable with Rufus (FAT32 / FreeDOS) and copied the files from MODBIOS to USB root.
Like I said, boots up from USB nicely and starts flashing SLIC.ROM, but then quits with "Invalid Flashint.Bin" error.
Even tried flashing with WinPhlash 1.7, doesn't work either but shows the error:
"Corrupted interface descriptors in the new BIOS file.
Part Table Signature no found in the Interface.
Error code:-161"
Ok try to use Original Bios folder !
Rename Bios Mod as Original Bios File and replace It then flash It as normal !
I checked Bios Mod and twice gave me the same file !
Try ask to Sovem is more expert than me about Slic !
Regards