Bios Mods -The Best BIOS Update and Modification Source

I reach FSB limit for this mobo is 140mhz any more have no effect simple after reboot in bios setup I will see for example 145 but when I boot windows cpu-z will detect only 140 (exactly 139,92) not even showing OC FAIL,

140 FSB, of course, is fully stable.
I would understand if the higher FSB was not stable but it clearly looks like a lock.
And about Ram Voltages I want push a bit more but 1.65V ( mobo limit) it to low for more OC.

In short I want find a way to unlock FSB and Ram voltages

Mobo specification http://www.asus.com/Motherboards/A88XMA/specifications/

I using latest bios version 2001.

Edit: Max FSB reported on Air for A88x was 182.99
http://hwbot.org/submission/2507140_reou...182.99_mhz

 

(01-13-2015, 09:05 AM)Rabit Wrote: [ -> ]I reach FSB limit for this mobo is 140mhz any more have no effect simple after reboot in bios setup I will see for example 145 but when I boot windows cpu-z will detect only 140 (exactly 139,92) not even showing OC FAIL,

140 FSB, of course, is fully stable.
I would understand if the higher FSB was not stable but it clearly looks like a lock.
And about Ram Voltages I want push a bit more but 1.65V ( mobo limit) it to low for more OC.

In short I want find a way to unlock FSB and Ram voltages

Mobo specification http://www.asus.com/Motherboards/A88XMA/specifications/

I using latest bios version 2001.

Edit: Max FSB reported on Air for A88x was 182.99
http://hwbot.org/submission/2507140_reou...182.99_mhz

Hi friend,
here You go for AMIBcp 4.50 :

http://rghost.net/59893020

Here You go for AMI Unlock Tutorial :

http://forums.mydigitallife.info/threads...)-ASUS-EFI

And Follow CodeRush Suggestions :

I have to flash my image on the administrator commandline using afuwinx64 bios_mod.rom /GAN ..
Otherwise it gives me a security error (Thanks again CodeRush)

It's certanly not so easy for BIOSes with another menu setup, but the whole idea is the same. 
I could also recommend trying AMIBCP to modify menu entries vilibility from "Default" to "USER",
if your menu setup is more complex then a setup above.

Regards

Some time pass, and I finally decide to try it but I cannot find DRAM voltage tab

Under bios this looking :


Any idea ?