01-24-2015, 12:49 PM
hi guys.
im stuck with a custom made tyan/foxconn/flextronics server board. it has 2 1366 sockets, and basically can run with 2 55xx processors.
if i install any 56xx processors, it stucks at "Configuring Intel Quickpath & Memory Interface".
so i added the 06C0, 06C1 and 06C2 microcodes or replace the whole microcode block(from tyan s7002) but still nothing.
i also tried to look at older asus board which ones has older bioses (with only 55xx support) and newer, to look at the differences but nothing useable. as i know the 45nm 55xx and 32nm 56xx are not much different, the original bios - without 06Cx ucodes - also stuck at "Configuring Intel Quickpath & Memory Interface".
the board has no any offical support, these was build for a custom claim. so any ideas?
thanks
[attachment=7723]
im stuck with a custom made tyan/foxconn/flextronics server board. it has 2 1366 sockets, and basically can run with 2 55xx processors.
if i install any 56xx processors, it stucks at "Configuring Intel Quickpath & Memory Interface".
so i added the 06C0, 06C1 and 06C2 microcodes or replace the whole microcode block(from tyan s7002) but still nothing.
i also tried to look at older asus board which ones has older bioses (with only 55xx support) and newer, to look at the differences but nothing useable. as i know the 45nm 55xx and 32nm 56xx are not much different, the original bios - without 06Cx ucodes - also stuck at "Configuring Intel Quickpath & Memory Interface".
the board has no any offical support, these was build for a custom claim. so any ideas?
thanks
[attachment=7723]