Hi there! It's my first post so I don't know i put it in the right place. I have Asus 1225B (E450 APU with Radeon 6320M, 4GB Ram) and on stock settings it can reach 70oC on idle, imo it's too much. I realize it's netbook and his cooling abilities are limited bo i've started to underclocking / undervolting CPU with some success but there is a GPU problem. I want to underclock and undervolt it but I can't find any application to do so. And there is the question:
Is there possibility to mod BIOS allow to control voltages / clocks of CPU, NB and GPU? or at least unlock this options to do it from BrazosTweaker?
Thanks for any reply and sorry about my english, hope You were understand me
Ok friend,
this is an AMI Aptio Bios so there are too many page o unlock and I don't knok
whih ones You are interested about !
So I will show the way and give to You the tools :
Here the Tutorial to Unlock :
http://forums.mydigitallife.info/threads...MSR-unlock!
Here is AMIBcp 4.55 Tool :
http://rghost.net/59893020
Follow the CodeRush Suggestions :
I have to flash my image on the administrator commandline using afuwinx64 bios_mod.rom /GAN ..
Otherwise it gives me a security error (Thanks again CodeRush)
It's certanly not so easy for BIOSes with another menu setup, but the whole idea is the same.
I could also recommend trying AMIBCP to modify menu entries vilibility from "Default" to "USER",
if your menu setup is more complex then a setup above.
Let me know
regards
Thanks for reply! I read that topic from link You gave me but I'm little confused about all these address numbers ( I'm not programmer, and have very limited knowledge about programming).
I was hoping someone on this forum can modify my bios file or at least guide me how to do it in easy way.
Flashing it to netbook isn't problem, I allready was modifying old Radeon bioses and successfully flashing graphic cards but the editing tool was very simple and intuitive.
I will try to make modifications on my own using tool and advice You gave me. After that where can I ask for checking my work on this forum? At the modifying section?