01-25-2015, 03:03 PM
I have a problem to successfully update my Bios. Every BIOS of the HP Driver Homepage for my old HP Notebook Model G6010EG is not working.
I already posted my whole story in the HP Support Forum (http://tinyurl.com/ltgzw6c) , but i don't expect any help...
"I always get the error: "This Bios Version is not for your PC / Notebook" if i want to run the update directyl after Installation.
Alternative:
Even if I copy the *.WPA (extracted from the downloaded bios-update *.exe installer ) file into the extracted folder of WinFlash64 directory (My Vista is 64-bit), and rename it to "BIOS.WPH" and run the flash util as administrator, i get the following error messages:
First Error:
Part ID of System Bios and new Image File are different (system = AT8, file = AT1).
The System Platfrom may be different from the Image file. Are you sure you want to proceed?
I click "Yes" and then the Pc freezes with the Error message:
BIOS update failed! Failed to flash Bios image: Enable Chipset/Platform/FlashDevice failed!
Incorrect funtion. Error code 1
See the Help for troubleshooting."
This is my current Bios File: http://www9.zippyshare.com/v/e0SQCAUI/file.html
Maybe anyone here has an idea or Bios Mod to get it working? I want to get SSD AHCI Support in Bios....
Thanks for Help!
I already posted my whole story in the HP Support Forum (http://tinyurl.com/ltgzw6c) , but i don't expect any help...
"I always get the error: "This Bios Version is not for your PC / Notebook" if i want to run the update directyl after Installation.
Alternative:
Even if I copy the *.WPA (extracted from the downloaded bios-update *.exe installer ) file into the extracted folder of WinFlash64 directory (My Vista is 64-bit), and rename it to "BIOS.WPH" and run the flash util as administrator, i get the following error messages:
First Error:
Part ID of System Bios and new Image File are different (system = AT8, file = AT1).
The System Platfrom may be different from the Image file. Are you sure you want to proceed?
I click "Yes" and then the Pc freezes with the Error message:
BIOS update failed! Failed to flash Bios image: Enable Chipset/Platform/FlashDevice failed!
Incorrect funtion. Error code 1
See the Help for troubleshooting."
This is my current Bios File: http://www9.zippyshare.com/v/e0SQCAUI/file.html
Maybe anyone here has an idea or Bios Mod to get it working? I want to get SSD AHCI Support in Bios....
Thanks for Help!