06-30-2010, 02:47 PM
(06-29-2010, 06:17 AM)1234s282 Wrote: [ -> ]One step closer to making this project a true reality!!!
Admin
I feel happy when I hear this and many more will be happy too!!!
Way to go, man!
(06-29-2010, 06:17 AM)1234s282 Wrote: [ -> ]One step closer to making this project a true reality!!!
Admin
(07-07-2010, 01:19 PM)Ace Wrote: [ -> ]1234s282 just wondered if you had any experience editing the p-states in the bios? atm we can update the agesa on the M2N-SLI Deluxe but although the cpu name shows up fine the multiplier is stuck at x4 unless you change it in windows, also the voltage stays at 0.9v unless you force it too.
Me and TheWiz have been trying for ages to get it working with no luck. Im getting pretty close to getting a new mobo. Having the cpu run with a constant voltage is giving me a really hot idle and wasting watts all the while.
any ideas??
(07-07-2010, 02:53 PM)sopo Wrote: [ -> ](07-07-2010, 01:19 PM)Ace Wrote: [ -> ]1234s282 just wondered if you had any experience editing the p-states in the bios? atm we can update the agesa on the M2N-SLI Deluxe but although the cpu name shows up fine the multiplier is stuck at x4 unless you change it in windows, also the voltage stays at 0.9v unless you force it too.
Me and TheWiz have been trying for ages to get it working with no luck. Im getting pretty close to getting a new mobo. Having the cpu run with a constant voltage is giving me a really hot idle and wasting watts all the while.
any ideas??
Hi Ace and 1234s282,
The new mod from Thewiz has the AGESA with X6 support, using Phenom MSR tweaker it is possible to override the bios emergency-settings directly from Windows, no need to change any settings from "auto" in bios. It starts with windows and sets multiplier and voltage from windows. Switching three-state is even better than Asus cool and quiet.
http://www.hardwareluxx.de/community/119...st171.html
These are the ones I use, it works perfect with start with windows under win7.
No new mobo yet for me, it takes some tweaking to get the switching levels right to let it run without bumping through power states all the time.
Sunday afternoon or evening I could test some new bios versions with recovery-chip.
(07-08-2010, 12:08 PM)Ace Wrote: [ -> ]yeah i'm going to try that anyways its just im concerned about phenom msr polling rate as nvidia system tools polling to change volts and frequency causes slight pauses every second. il flash it later on and let you know anyhoo
(07-27-2010, 05:35 PM)ej52 Wrote: [ -> ]Hey allDear EJ52,
Is this mod still alive?
I have recently started bios modding and would seriously like the m2n boards 2 have full AM3 support
I have added the new AGESA and CPUCODES 2 my M2N32 SLI DLX bios and it seems 2 work properly
Although that is with a Athlon CPU, still deciding what AM3 CPU 2 get.
At the moment i'm reverse engineering my bios looking for the code that sets the default x4 multi but with no luck
So if this project is still alive i would be happy 2 help out in anyway
If you can't get hold of me here i am a active member over at OCN forum
Thx
Ej52