Here you go , i used Acer 2.1 SLIC + Certificate Included:-
1. Copy and paste ******.XRM-MS certificate file into C-Drive.
2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.
3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.
4. After receiving the message that the license was installed successfully, type at the command prompt:
slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.
5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.
http://dl.dropbox.com/u/747181/Acer%20As...34s282.zip
Flash at your own risk!
Please Report Back With Whether It Worked Or Not!
Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work
Regards
Admin
Thank you for your response.
Would you mind to show me how to flash bios using FLASHIT ?
I've been searching the google for the direction. right now i'm in confused.
Thank you so much.
I appreciated your help
Create a bootable DOS USB/CD/DVD (Follow the guide in our tutorials section). Place all files except the .XRM-MS certificate file in the download onto the USB/CD/DVD
Insert USB drive and type this at the DOS Prompt:
KAL90108.bat
Wait a few minutes for the BIOS to program and then reboot the computer. If all is well and you arrive back at the desktop , you can then copy the .XRM-MS certificate file included in the mod download into the C: drive and follow the instructions I posted above to install the certificate.
If you have any problems throughout this process after flashing the modded bios , you can follow the recovery instructions in the tutorials section (If ythe laptop wont boot again) or provide us with screenshots using
http://dl.dropbox.com/u/747181/SLIC_Dump_ToolKit.EXE to confirm that the SLIC mod took successfully
Kind Regards
Admin
I created the Bootable USB like the guide in tutorial. I can boot into DOS but I cannot run flashit.
It said "Not enough available memory"
The posted MODDED BIOS WORKS !!!
THANK YOU SO MUCH !!