Bios Mods -The Best BIOS Update and Modification Source

Full Version: [Request] Bios Mod for Asus Rampage II Gene
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hello,

I have this motherboard "Asus rampage II Gene" and would like to know if it's possible to get a modded bios for a 3TB hard drive ?

exemple :

Intel ICH10R SATA RAID Controller:
Marvell SATA Controller
Intel Gigabit Network

etc

Here is the link of the bios :
https://mega.co.nz/#!E0RmRBRQ!PZuujEUkP-...M6fJ3dUBKc



Thank you in advance for your help Smile
Hi~~friend!!
I try to update some module with you provide bios,contain raid module.
Now you can flash it and test your 3tb hd if it's boot,and remember to response.

Here is bios mod download link:
https://mega.co.nz/#!WoJFlTBB!-6ltrOvcD0...o73vozQdoU


Feng
thank you so much i'll test the new bios
Hi, all is perfect, thanks but now i have an other question...

In my bios i can set only for the dram bus voltage 1.5v or higher and in what i saw, the Rampage III Gene can be configurable at lower than 1.5v, do you think it's possible for you to modify my bios and to unlock the Dram memory voltage for a compatibility in 1.35v for example ?


Thx
Hi~~
Standard voltage of DDR3 was 1.5v,so i think you didn't need to modified and think too much,or you can use lower voltage version ddr3 module.
Hi
yes this is what i use "1.35v crucial memory" but in this motherboard, the lower i can set is only 1.5v
in the rampage iii gene it is possible to go under 1.5v but not with the rampage ii gene and what i was thinking is if there is a possibility to modify this bios ?
Hi~~
If you set Extreme OV=enable if it still can't to adjust voltage??
Hi

yes but only to go higher from 1.5 to 2.5v and in disable option=max 1.8v
but nothing to go under 1.5v