So a BIOS modification would not work for me at all?
The only solution is a programmer?
I've been looking through the BIOS all day with IDA, trying to find the whitelist.
The only interesting thing i've found is a module named: SystemErrorLogPei
It contains several strings that i'm trying to figure out what means:
"1000101010001010100010000"
"100010100010100010000"
They might just be references to some offsets, i'm not that used to assembly.
One offset is named: off_FFFA8DEC
Also the function: "sub_FFFA8F53" has 11 sub-routines it can go to.
That's just the things i've "found" so forth.
Anyway. I'll try to locate a programmer asap. Thanks for your help! Much appreciated!

My CH341A programmer finally arrived in the mail today! Yeeey!
So how do i proceed now to get this whitelist problem fixed?

Here's my motherboard.
The soic8 chip with the red ring around it, is a Winbond chip: Serial:25Q64FVSIG
This is the only Winbond chip i could locate on the motherboard.
I'm guessing it's the right chip, as Google says it's a 64Mbit SPI flash chip, and my BIOS is 8MB (64Mb). Am i correct?
EDIT:NB! The serial number i posted was wrong, i have updated the post to show the real number!
Sorry for using such a long time, but i had to connect my chip to the programmer without the clips!
But i finally managed it!
Here is the BIOS image from the programmer:
https://www.sendspace.com/file/rnj3mq
I used an English version of the CH341A programmer, and it worked great!
I'm actually quite impressed i managed to do this, without any issues at all!

Btw, i ran a checksum on this image from the programmer, and compared it with the normal bios dump, and it differed.
I'm guessing it's supposed to differ, right?
I successfully wrote your imagefile. But still got the same error: unauthorized device. :/