I recently bought a new pair of ram modules. HyperX 2133
Unfortunately i cannot use them at full speed since the bios is locked to 1333 MHZ
fsb. I upgraded the CPU too but i might need this to use them at full potential.
Any help appreciated
Thanks.
We can not help if we do not provide us with the bios...
I'm very sorry.
Apologize for the inconvenience.
Here we are.
I cannot find into Bios the 0x535h lock !
It may be is just the FSB limit about MoBo project and I cannot find the
Schematics Manual to check but You can look some about the Chipset to
check if limit is 1333 (aka 535 hex) !
Let me know
Regards
Check your PM and let me know what do you want from me further.
I have Phoenix259. Original Bios and Decrypted.
Ok mate,
You are SuperUser !!!
Read the Full Dump Firmware from the Eeprom Chip and make a backup then
upload It here for me and I will Patch for You !
Let me know
Regards
Check your email.
I've sent to you pictures from the dump process and everything you need is there.
In the files you will find the dump the verification of the dump and missing DMI info.
I've used the Nano USB Programmer on Win10 x32 for the dump.