Hey all,
I could use a little of your expertise. I'm looking to unlock my BIOS to do the following:
1) Show hidden menus
2) Remove whitelist for second PCIe slot
For reference I am using
this BIOS and I am trying to install the Broadcom Crystal HD (
BCM70015) into the second PCIe slot.
I'm a bit new to this whole process so if there is any additional information, etc that you should need, please let me know.
Thanks in advance.
(04-27-2015, 04:12 PM)BDMaster Wrote: [ -> ]Use this tol run It as Admin and upload the result file here :
http://rghost.net/7xBfRPCvp
http://rghost.net/53128665
let me know
Regards
Thanks much! Not sure how much use this will be but here goes.
The Universal Bios Backup.exe failed to launch properly. It generated a "Kernel library is invalid!" error (error.jpg).
I was able to run the BACKUP_Tools12.exe file and it completed successfully. Unfortunately, each stage appeared to end in the following error: "Error 201: [FPTw.exe] cannot be run on the current platform. Please contact your vendor.". Nonetheless I have included the results.rar file in case it helps. For the record, I am running Win7 Home Premium (x86).
Thanks again for the help and please let me know if there is anything else I can do.
Thanks.
Your laptop has an AMD CPU ?
There are 3 Bioses :
BIOSFL5
BIOSFL5C
BIOSFL5D
Which one uses your laptop ? canu You pload a screenshots of label under Bottom laptop ?
You can see into Bios Setup Information Tab , upload a screenshot of It, or use AIDA64
(cracked version) to get a full report, then upload here !
Let me know
Regards
(04-28-2015, 04:07 AM)BDMaster Wrote: [ -> ]Your laptop has an AMD CPU ?
There are 3 Bioses :
BIOSFL5
BIOSFL5C
BIOSFL5D
Which one uses your laptop ? canu You pload a screenshots of label under Bottom laptop ?
You can see into Bios Setup Information Tab , upload a screenshot of It, or use AIDA64
(cracked version) to get a full report, then upload here !
Let me know
Regards
I'm actually using the Intel variant (more infor in the dxdiag.jpg attachment). I've also attached the screenshots per request. As for the BIOS version I am using the 2ACN37WW (2AEC26WW). Thanks much!
Ok friend,
try this one (unpack It and Run as Admin this 2ACN37WW.exe) :
http://rghost.net/8F8tGYRQc
let me know
Regards
Donate to me . . . look into my Signature
Thanks! Wow, that was fast. I'll give this a try shortly. I'm headed to the airport and will give it a whirl once I get there. Thanks!
@BDMaster - I went ahead and flashed the S10-3 but didn't notice any changes to the BIOS or with the PCIe card recognition. I dug a bit deeper and it looks like the flash utility wants to flash the PC with the BIOSFL5.WPH file. I took a look at the various WPH files in the package and it looks like the BIOSFL5D version was updated. I did not try to force the flashing utility to look at that version of the WPH file as I was unsure if it would take/brick my device.
Can you advise if I need to have the BIOSFL5.WPH file modified or if I can foce the flashing utility to try and flash the other file?
Thanks again for all your help.
@BDMaster - I gave this a quick try but no dice. I ran this a couple different times but didn't see any changes to the BIOS screen and the second PCIe slot doesn't show. That said, I can try swapping the cards later tonight to see if that helps. I'll report back once I have a chance to try that. Thanks.