(08-22-2014, 01:10 PM)mike760534211 Wrote: [ -> ]attempted to flash from bootable dos usb disk and gave red errors about unable to write to protected sectors.
Error 28:
(08-22-2014, 11:15 AM)BDMaster Wrote: [ -> ]Ok friend,
here is your Bios Mod based on your backup by FPT 9.5 :
http://rghost.net/57614310
Follow instructions to flash It from USB Dos Stick !
Let me know
Regards
Hi friend,
I am sorry You can flash this Bios only using an SPI External USB Programmer !
look here :
https://www.bios-mods.com/forum/Thread-T...ware-Flash
Regards
(08-22-2014, 02:24 PM)mike760534211 Wrote: [ -> ]no other way?? if not then i can still send the card back.
(08-22-2014, 02:17 PM)BDMaster Wrote: [ -> ]Hi friend,
I am sorry You can flash this Bios only using an SPI External USB Programmer !
look here :
https://www.bios-mods.com/forum/Thread-T...ware-Flash
Regards
No By my side there aren't ! I am sorry !
Try to ask to Sovem (great Modder) too, write a PM !
Regards
Regards
Trying to upgrade my WLAN card in my T540p to a Wireless-AC card, it currently says that it is unauthorized, which totally sucks.
Here's the info... I am using BIOS gmuj14us/GMET70WW which can be found here -
http://download.lenovo.com/ibmdl/pub/pc/...uj14us.exe
PCI ID of current WLAN card - PCI\VEN_8086&DEV_08B2&SUBSYS_C2628086&REV_6B
I accept any risk associated with modifying my bios...
Here is the backup of my current bios, please let me know if anything else is needed!
https://www.dropbox.com/s/5s8zpvdlnrhk3w...9.rom?dl=0
Please help!!
Kyle
(04-27-2015, 09:22 AM)BDMaster Wrote: [ -> ]Here You go :
http://rghost.net/6ZYDTkJY8
let me know
Regards
Donate to me for my work and time . . . look into my Sigature
Sweet thanks! Apparently I need an external SPI programmer, so when the one I ordered gets here I will try it out!
Kyle
(04-27-2015, 08:31 AM)khufford Wrote: [ -> ]I just found this thread, is it possible to update this bios to the newest (GMET70WW) available here - http://download.lenovo.com/ibmdl/pub/pc/...uj14us.exe
Here is a copy of my backup if needed... https://www.dropbox.com/s/5s8zpvdlnrhk3w...9.rom?dl=0
I am in the process of procuring an external SPI programmer and clip so that I can perform this upgrade.
Thanks!
Kyle
hi, just a few days ago I found cheap programmer that has got support for bios chips used in mine t540p (i wrote their numbers in the other thread) - "EZP_XPro" - can be found on aliexpress for $28. Other cheap solution that should also work is to use eg. arduino or raspberry-pi with flashrom (flashrom.org) bios flasher and pomona clip. Other flashers, like CH341A, TL866CS...(that can be found for a few $ on ebay) based do not have got support for my bios chips in their software, but maybe they would be able to read/write them.
I don't have got time to deal with it now (writing master thesis, hopefully, in a two months i'll have got time for it). If you'll have any luck, please post. Saw your other thread
btw, if you need, i can send you also info where the bios chips are - basically, you need to disassemble whole chases.
(04-27-2015, 12:36 PM)stanos4 Wrote: [ -> ]hi, just a few days ago I found cheap programmer that has got support for bios chips used in mine t540p (i wrote their numbers in the other thread) - "EZP_XPro" - can be found on aliexpress for $28. Other cheap solution that should also work is to use eg. arduino or raspberry-pi with flashrom (flashrom.org) bios flasher and pomona clip. Other flashers, like CH341A, TL866CS...(that can be found for a few $ on ebay) based do not have got support for my bios chips in their software, but maybe they would be able to read/write them.
I don't have got time to deal with it now (writing master thesis, hopefully, in a two months i'll have got time for it). If you'll have any luck, please post. Saw your other thread
btw, if you need, i can send you also info where the bios chips are - basically, you need to disassemble whole chases.
Stanos -
Thanks, any info you have would be greatly appreciated, I just started looking at the programmers. Wish I could get something stateside so I didn't have to wait 2 weeks for it.
Kyle