06-11-2015, 03:51 AM
06-11-2015, 06:13 AM
Have You pressed ENTER to continue ?
If You press the ENTER Key and You get PASSED reply then the Bios Mod is flashed
and all is working otherwise We have to use an HW SPI Programmer !
Let me know
Regards
If You press the ENTER Key and You get PASSED reply then the Bios Mod is flashed
and all is working otherwise We have to use an HW SPI Programmer !
Let me know
Regards
06-16-2015, 01:53 PM
(06-11-2015, 06:13 AM)BDMaster Wrote: [ -> ]Have You pressed ENTER to continue ?
If You press the ENTER Key and You get PASSED reply then the Bios Mod is flashed
and all is working otherwise We have to use an HW SPI Programmer !
Let me know
Regards
Hi.
yes '
When i press ENTER, , the same error comes up again, please see attached image.
Then i must "Press any key, to continue", and then i get back to Dos. (you can see the original error, in the top, )
i tried to use the new wifi card, and i still get the "authorised wifi " error so i guess the flashing, newer starts, because of the error, that you see with RED ....
06-25-2015, 01:14 PM
? anyone ?
06-25-2015, 03:40 PM
Ok friend,
You have two Eeprom Chips and They have to get same comands aligned into Fparts.txt !
W25Q64BV, 0xEF4017, 0x4000000, 0x1000, 0x20, 64, 0, 0xc7, 80000
MX25L1605A, 0xC22015, 0x1000000, 0x1000, 0x20, 64, 0, 0x60, 80000
So You have to change both fields 0xc7 and 0x60 to get the same value !
So first try to align both to 0xc7 and then if don't work align both to 0x60
E.G. :
W25Q64BV, 0xEF4017, 0x4000000, 0x1000, 0x20, 64, 0, 0xc7, 80000
MX25L1605A, 0xC22015, 0x1000000, 0x1000, 0x20, 64, 0, 0xc7, 80000
Or
W25Q64BV, 0xEF4017, 0x4000000, 0x1000, 0x20, 64, 0, 0x60, 80000
MX25L1605A, 0xC22015, 0x1000000, 0x1000, 0x20, 64, 0, 0x60, 80000
So anytime change values using a texteditor and save file into USB Stick and try Flash.bat !
Let me know
Regards
You have two Eeprom Chips and They have to get same comands aligned into Fparts.txt !
W25Q64BV, 0xEF4017, 0x4000000, 0x1000, 0x20, 64, 0, 0xc7, 80000
MX25L1605A, 0xC22015, 0x1000000, 0x1000, 0x20, 64, 0, 0x60, 80000
So You have to change both fields 0xc7 and 0x60 to get the same value !
So first try to align both to 0xc7 and then if don't work align both to 0x60
E.G. :
W25Q64BV, 0xEF4017, 0x4000000, 0x1000, 0x20, 64, 0, 0xc7, 80000
MX25L1605A, 0xC22015, 0x1000000, 0x1000, 0x20, 64, 0, 0xc7, 80000
Or
W25Q64BV, 0xEF4017, 0x4000000, 0x1000, 0x20, 64, 0, 0x60, 80000
MX25L1605A, 0xC22015, 0x1000000, 0x1000, 0x20, 64, 0, 0x60, 80000
So anytime change values using a texteditor and save file into USB Stick and try Flash.bat !
Let me know
Regards
06-25-2015, 04:16 PM
im very newbie here.. can you do, if i donate ?
06-26-2015, 01:09 PM
Yes there are two files here attached then use first one and replace into USB Stick
to try if don't work try second !
here You go :
http://rghost.net/7qNflrS2d
Let me know
Regards
to try if don't work try second !
here You go :
http://rghost.net/7qNflrS2d
Let me know
Regards
06-29-2015, 02:21 PM
i tried both , but with same error.
what now ???
what now ???
06-29-2015, 03:13 PM
No There is not the 104 Error this tima but only Error 28 !
Try to flash from Windows and do this procedure :
SLEEP BUG
So unpack the Bios Mod file then copy modified folder into C: HD root place !
Then open a Comand Prompt with Admin Rights (CLI) and run this comands :
cd \
cd C:\modified
Then put the laptop into SLEEP mode and WAKE-UP It again so run these comand
fptw -f bios.bin -bios
(for win7 x64 use fptw64)
and look the result, You have to get PASSED after wote Bios.bin, then let me know !
Regards
Let me know
Regards
Donate to me for my work and time . . . look into my Signature
Try to flash from Windows and do this procedure :
SLEEP BUG
So unpack the Bios Mod file then copy modified folder into C: HD root place !
Then open a Comand Prompt with Admin Rights (CLI) and run this comands :
cd \
cd C:\modified
Then put the laptop into SLEEP mode and WAKE-UP It again so run these comand
fptw -f bios.bin -bios
(for win7 x64 use fptw64)
and look the result, You have to get PASSED after wote Bios.bin, then let me know !
Regards
Let me know
Regards
Donate to me for my work and time . . . look into my Signature
06-30-2015, 02:45 PM
(06-29-2015, 03:13 PM)BDMaster Wrote: [ -> ]No There is not the 104 Error this tima but only Error 28 !
Try to flash from Windows and do this procedure :
SLEEP BUG
So unpack the Bios Mod file then copy modified folder into C: HD root place !
Then open a Comand Prompt with Admin Rights (CLI) and run this comands :
cd \
cd C:\modified
Then put the laptop into SLEEP mode and WAKE-UP It again so run these comand
fptw -f bios.bin -bios
(for win7 x64 use fptw64)
and look the result, You have to get PASSED after wote Bios.bin, then let me know !
Regards
Let me know
Regards
Donate to me for my work and time . . . look into my Signature
same error