Bios Mods -The Best BIOS Update and Modification Source

(09-01-2015, 05:51 AM)BDMaster Wrote: [ -> ]Here You go .

http://rghost.net/7frHflRfN

Follow this Recovery Procedure :

format an USB Stick as FAT32 and copy into the file . . .

- Shutdown the netbook (notebook)
- Remove all peripheral devices
- Remove battery, Remove AC power cord
- Press and hold the power button for 10 seconds (battery and AC power still out), then release
- Put the USB Memory Stick in the USB port
- Hold "Fn" + "Esc" and plug the AC power cord in
- Now press the power button (whilst still holding Fn + Esc).
Wait until the fan will run, then release "Fn" + "Esc" keys
- The fan will run for about 2-10 minutes and the USB drive activity LED will blink
- I think the netbook rebooted automatically. If it doesn't, unplug the AC power cord once the fan has turned off

The bios should be updated with the modified BIOS, and boot as per normal.

Let me know
Regards

(05-20-2016, 03:50 AM)harrinus Wrote: [ -> ]Hello. Im New to the site so i hope this is the right place to ask this. I have a emachine G725 laptop and i updatet BIOS other day to unhide the advanced settings all went fine ite bootet and i went to the BIOS settings to look around and i did change something but i cant remeber what anymore and after that display has been black. Ite will tuen on and everythin and i have try to do crisis recovery 100times whit diffrent bioses and rename the fd to bin as successed in the BIOS recovery side here and did everything exactly as the guides tell me to but every time result is the same. Ite will start reading the usb stick and fans go up but then ite will just shutdown and i cant get the laptop to turn on untill i take the AC power Cord away and put it back in. Then it will start again but black screen always. I have also try diffrent key componations but ite seems fn + esc are the right ones. So i really am clueles what to do now..

(05-20-2016, 04:42 AM)Ludonja Wrote: [ -> ]

(05-20-2016, 03:50 AM)harrinus Wrote: [ -> ]Hello. Im New to the site so i hope this is the right place to ask this. I have a emachine G725 laptop and i updatet BIOS other day to unhide the advanced settings all went fine ite bootet and i went to the BIOS settings to look around and i did change something but i cant remeber what anymore and after that display has been black. Ite will tuen on and everythin and i have try to do crisis recovery 100times whit diffrent bioses and rename the fd to bin as successed in the BIOS recovery side here and did everything exactly as the guides tell me to but every time result is the same. Ite will start reading the usb stick and fans go up but then ite will just shutdown and i cant get the laptop to turn on untill i take the AC power Cord away and put it back in. Then it will start again but black screen always. I have also try diffrent key componations but ite seems fn + esc are the right ones. So i really am clueles what to do now..

Find at official site orginal bios file and use eeprom programer to fill it in.
Of course, you need to desolder bios chip from motherboard.
If you are not able to do that find someone who is.
I hope it will help you.


THX for the tip but i just got this solved. I find out there was 2 tin pins under the rams that sayd jump1 and jump 2 connecting these 2 whit screwdrivers resetet the bios to it default settings and screens up again. Sense the problem wasnt  bad flash it was just the settings in bios so this got it solved. Took me ages to find out but finnally succsess!

(09-01-2015, 06:14 AM)raafuks Wrote: [ -> ]

(09-01-2015, 05:51 AM)BDMaster Wrote: [ -> ]Here You go .

http://rghost.net/7frHflRfN

Follow this Recovery Procedure :

format an USB Stick as FAT32 and copy into the file . . .

- Shutdown the netbook (notebook)
- Remove all peripheral devices
- Remove battery, Remove AC power cord
- Press and hold the power button for 10 seconds (battery and AC power still out), then release
- Put the USB Memory Stick in the USB port
- Hold "Fn" + "Esc" and plug the AC power cord in
- Now press the power button (whilst still holding Fn + Esc).
Wait until the fan will run, then release "Fn" + "Esc" keys
- The fan will run for about 2-10 minutes and the USB drive activity LED will blink
- I think the netbook rebooted automatically. If it doesn't, unplug the AC power cord once the fan has turned off

The bios should be updated with the modified BIOS, and boot as per normal.

Let me know
Regards

Thank you mate!
Update process taken only 45-50 seconds. Laptop rebooted automatically!