Hello,
I have a small request as own attempts where not sucsesfull. I need removal of the cpu whitelist or the E5-2667v2 included in the whitelist of an fujitsu R920.
Revision of the mainboard is D3118A1
Known is that Revision of the mainboard D3118A2 (used in celcius R930) supports the E5-2667v2.
Both bioses including the flash versions are on the support site of fujitsu:
They can be found under: Support > Computing Products > Client Computing Devices > Workstations > Celcius > Celcius R series and then you can find the R920 and the R930.
The flash version can be opened withy phoenixtool
My own attempt to find the whitelist failed due to lack of knowledge, If you can send me a tutorial it is also fine with me, any help is welcome. In the end I hope to figure out how to do it myself
Thanks in advance,
Don
D3118-A1x is based on
C602 chipset and
D3118-A2x is based on
C602J chipset.
Only second chipset supports
Ivy Bridge core. So you can't run
Xeon E5-2667 v2 in your
Fujitsu CELSIUS R920.
(09-17-2015, 03:03 PM)DeathBringer Wrote: [ -> ]D3118-A1x is based on C602 chipset and D3118-A2x is based on C602J chipset.
Only second chipset supports Ivy Bridge core. So you can't run Xeon E5-2667 v2 in your Fujitsu CELSIUS R920.
That explains a lot, Thanks very much... I was getting weird responces from the motherboard...
Use this tool run It as Admin and upload here the result file :
http://rghost.net/7GBZt7FVt
http://rghost.net/53128665
Use AIDA64 tool too (cracked version to get FULL REPORT) and upload a Report too
let me know
Regards
This Bios is an AMI Aptio so you can use this Tutorial and Guide to Unlock and Modify :
Here is the last AMIBCP version 4.55 :
http://rghost.net/59893020
Here is a Tutorial to modify AMI Aptio Bios :
http://forums.mydigitallife.info/threads...MSR-unlock!
Follow CodeRush Suggestions :
It's certanly not so easy for BIOSes with another menu setup, but the whole idea is the same.
I could also recommend trying AMIBCP to modify menu entries vilibility from "Default" to "USER",
if your menu setup is more complex then a setup above.
I have to flash my image on the administrator commandline using afuwinx64 bios_mod.rom /GAN . . .
Otherwise it gives me a security error (Thanks again CodeRush)
https://www.bios-mods.com/forum/Thread-G...EFI-Aptio4
Then to replace some parts to render It compatible It needs to check FITC and Intel Limit HW !
Here is your Bios Unpacked and loadable for AMIBcp - MMTool - PMT - UEFITool !
http://rghost.net/8vWjvXcQY
Regards
(09-17-2015, 03:12 PM)BDMaster Wrote: [ -> ]Use this tool run It as Admin and upload here the result file :
http://rghost.net/7GBZt7FVt
http://rghost.net/53128665
Use AIDA64 tool too (cracked version to get FULL REPORT) and upload a Report too
let me know
Regards
This Bios is an AMI Aptio so you can use this Tutorial and Guide to Unlock and Modify :
Here is the last AMIBCP version 4.55 :
http://rghost.net/59893020
Here is a Tutorial to modify AMI Aptio Bios :
http://forums.mydigitallife.info/threads...MSR-unlock!
Follow CodeRush Suggestions :
It's certanly not so easy for BIOSes with another menu setup, but the whole idea is the same.
I could also recommend trying AMIBCP to modify menu entries vilibility from "Default" to "USER",
if your menu setup is more complex then a setup above.
I have to flash my image on the administrator commandline using afuwinx64 bios_mod.rom /GAN . . .
Otherwise it gives me a security error (Thanks again CodeRush)
https://www.bios-mods.com/forum/Thread-G...EFI-Aptio4
Then to replace some parts to render It compatible It needs to check FITC and Intel Limit HW !
Here is your Bios Unpacked and loadable for AMIBcp - MMTool - PMT - UEFITool !
http://rghost.net/8vWjvXcQY
Regards
https://www.sendspace.com/filegroup/FDSu...LSfwucMTDA
hereby the first tools, and aida attached
I am doing a lot of research to figure out which one is inside the c602 or the j one as the r930 is also specified as c602
thanks a lot,
Regards Don
It could be very possible that the r920 is based on the basic c602 chipset and the r930 motherboard on the c602j however I can not find any info that would lead to confirmation that that is true, However I could find a source claiming that the c602 only can have one sas port (4 sata ports) while my motherboard has 2. I do however not trust this source...
another bit of info,
with the e5-2667v2 in the socket the mobo will not even post