Is it possible to unlock menus in this bios? The chipset should support sata2 but there's no option to select AHCi or IDE, also there are probably hidden submenus.
I am using this bios in a U50SI1 mb based laptop.
http://kfgl.hasee.com/bios/bios_nb/U40SI....16.04.rar
I just replied in PM so ask to Sml6397 as It's an Phoenix new style Bios so
older version !
Reagrds
No one? in the strings section I found this:
'This Option provide ', 0Dh, 'user can be change ', 0Dh, 'device ID operation', 0Dh, 'mode by this option.', 0Dh, 0Dh, 'NOTICE:', 0Dh, 'Some mode must be ', 0Dh, 'Hardware Layer Out', 0Dh, 'supported.', 0Dh, 'Device ID List:', 0Dh, '5513 (IDE) 2P2S', 0Dh, '1180 (IDE) 2P2S', 0Dh, '1182 (RAID) 4S', 0Dh, '1183 (IDE) 4S', 0Dh, '1184 (RAID) 2S', 0Dh, '1185 (AHCI) 2S'
I think related to 'IDE PATA+SATA ID Control'
AHCI is mentioned, the chipset should support the mode
I was able to add the 'IDE PATA+SATA ID Control' menu to bios.
However if I set the IDE + AHCI (5513+1185) the bios resets to 5513+1183 ( IDE + IDE ).
I made a version with default values set to IDE + AHCI but nothing changes, bios resets to IDE + IDE.
The chipset is 672m + 968 which should support AHCI...
Here's the modded bios if anyone interested.
https://www.dropbox.com/s/ukq5w6setm8pm5...M.zip?dl=0
Hmm I extracted a SIS RAID option rom from an AMI bios and inserted it in the bios, build it and flashed but still no RAID nor AHCI available.
Here's modded bios with RAID rom inserted. Any clue?
https://www.dropbox.com/s/9vocxpei55604k...M.zip?dl=0
On another note, with this modded bios I was able to access the FSB speed pair menu and was able to upgrade from 1GB to 2GB ram using an Hynix pc2-6400 800mhz module. The module works only if you set the FSB to 800+667 from AUTO. Another pc2-5300 667mhz module by kingston doesn't work at all.
Here's cpuz screen regarding ram, it's running at 667mhz of course (333x2)
the MB is an uniwill / ECS U50SI1
Hi~~
I've checked bios from post#10 ,after spent some time i thought i can unlock some sections.
Here are some emulate screens from PBE(phoenix bios editor)
I replace contents of Advanced tab.
But i found issue when i enter to [Embedded Device Menu] ,look like in below.
So , i choose kill this section ,finally modification look like in below.
Do you wanna test it??