Hi, i have an IdeaPad S510P, i bought a 4Gb Kingston RAM and i tried to mount it on the laptop, Speccy says that i have 2 of 4 slot of memory full, and that i have 8192Mb of RAM, but on BIOS and on System it results that i only have 4Gb, i need to unlock the Bios Remapping, that there isn't in my bios, so i ask you if it is possible.
Here it is my mainboard and BIOS from CPU-Z:
![[Image: YLyojYv]](http://imgur.com/YLyojYv)
(11-17-2015, 03:06 PM)BDMaster Wrote: [ -> ]Use this tool run It as Admin and upload here the result file :
http://rghost.net/658W4s2SF http://tiny.cc/rwy24x
http://rghost.net/53128665 http://tiny.cc/bxy24x
Use AIDA64 tool too (cracked version to get FULL REPORT) and upload a Report too
let me know
Regards
P.S. I will give a look 
Hi,
i tried both programs, if i download the first i can't open it, as an admin but also as simple user.
The second, instead, doesn't work with my bios and says that can't identify the BIOS.
AIDA64 works, here's the link (i've done the test with hardware information):
Link
Let me know, thank you so much
Use second, put the flasg to set dimension and use max size e.g. 8192 KB then
push Read Button and make the Dump !
After upload It here !
Let me know
Regards
(11-19-2015, 03:03 PM)BDMaster Wrote: [ -> ]Here You go :
http://rghost.net/7lKrgdHxM
let me know
Regards
Donate to me for my work and time . . . look into my Signature
Hi, i downloaded the file and set the usb key (and the bios, to start from usb) then i tried to run "flash.bat" but it doesn't work, showing a message that says that it can't work with 64bit pcs
let me know
Thanks
Hey mate,
You have to Boot it form the USB !!!
You have to prepare an USB Stick by RUFUS tool then following the instructions
copying all files form modified folder into USB Stick and go to the Bios setup
then Set secuce Boot Disable and Legacy Boot USB and boot From the stick
When You get int CLI C:\ the DOS env. then execute the flash.bat command !
Let me know
Regards
Hi,
I finally found how to disable secure boot and i managed to upgrade my BIOS, now there's also the 'memory remap' voice but windows shows me always 4gb instead of 8gb (but speccy recognize them).. What to do?
First of all thank you very very much for the bios, you're my hero.
Hi mate,
If You get a Windows x32 then the limits will be max 3 GB on x64 can be over !
Let me know
Regards