07-20-2017, 06:43 AM
Pages: 1 2
07-25-2017, 10:33 AM
So i thought today test the cpu again. I broke some pins from an old cpu to stick them into the sockel where i have broke them from the Q9100. I don´t know if all pins connected or some not, but the laptop starts. In Bios i saw the Q9100.
Then i got a Bluescreen, in save mode windows doesn´t even starts.
I went into the Bios and disabled: Intel Dynamic Acceleration Mode. After that all is fine.
Windows starts and Cpuz shows me all cpus.
The Temperatur is a problem i run the cpus at 100% for some min. T>100°C. I stopped it bevor i damage something. At 50% for all cpus T=75-80 °C.
I think i will test a cooling rib, glue it next to the copper where the cpu is. Or any other idears?
Then i got a Bluescreen, in save mode windows doesn´t even starts.
I went into the Bios and disabled: Intel Dynamic Acceleration Mode. After that all is fine.
Windows starts and Cpuz shows me all cpus.
The Temperatur is a problem i run the cpus at 100% for some min. T>100°C. I stopped it bevor i damage something. At 50% for all cpus T=75-80 °C.
I think i will test a cooling rib, glue it next to the copper where the cpu is. Or any other idears?
07-25-2017, 11:44 AM
So TDP=45W is too much for this laptop.
Pages: 1 2