Bios Mods -The Best BIOS Update and Modification Source

Full Version: PEGATRON IPMSB-GS/LGT (H67) & Ivy Bridge
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2
I have Pegatron IPMSB-GS Motherboard. I want to use my Intel G2010(Ivy) processor instead of i72600 (not K just 2600) (Sandy)
My Board has H67 chipset. My manufacturer does not provide support.
When i boot up with G2010 i got 4 short beeps. It works fine with i72600. I tried bios modding but i failed.

Here is my current Bios:
https://www.dropbox.com/s/duokmts3chc4m4...8.zip?dl=0
It does not boot. 4 short beeps. Works with i72600
CPUID: 000306a9
SPEC: G2010

Please Help Me. Show me a way to solve this.
Thank you all in advance.
Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with native CPU.
P.S. And tell correct name and revision of the motherboard. Or make a good foto of your motherboard.
(03-17-2016, 12:07 AM)DeathBringer Wrote: [ -> ]Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with native CPU.
P.S. And tell correct name and revision of the motherboard. Or make a good foto of your motherboard.

My bios file is attached at the beginning of the post.
My Motherboard is Pegatron IPMSB - GS
I cannot access cpu z right now.
My motherboard has h67 chipset.
I want to use my Pentium G2010 cpu on it.
My native cpu is i7 2600
Can you please ask the necessary info here and i will supply.

Thank you.
Where are screenshots?
Attached BIOS is latest version for IPMSB-GS/LGT, not for IPMSB-GS.

This is BIOS for IPMSB-GS/LGT (BIOS tag = 00391009), not for IPMSB-GS (BIOS tag = 00288009). Latest version can be download here.
But your motherboard doesn't support Ivy Bridge, because its chipset has B2 revision.
(06-17-2016, 07:39 AM)DeathBringer Wrote: [ -> ]But your motherboard doesn't support Ivy Bridge, because its chipset has B2 revision.

I have the same mobo (slightly different, may be another revision)and the same question - does it support Ivy? I remove the heat sink from PCH and read spec code - it's a SLJ49, so revision is B3 i think. Is it only necessary condition for ivy support or not? Can you help me find proper BIOS with ivy support for this mobo? Thank you!

P/S sorry for my english, it doesnt my native  Blush
AronEl
"same mobo" or "slightly different"? Please tell the full name of the motherboard.
Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with native CPU.
(08-06-2016, 07:13 AM)DeathBringer Wrote: [ -> ]AronEl
"same mobo" or "slightly different"?
Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with native CPU.

OK, i will post it after tommorow, doesnt have it at home  Shy 
yet slightly another. it have another set of interface ports. same name only i think  Confused
Make a good foto of your motherboard.
(08-06-2016, 07:38 AM)DeathBringer Wrote: [ -> ]Make a good foto of your motherboard.

Foto is here:
https://yadi.sk/i/p9Fo22oqtzyuT
https://yadi.sk/i/GskYHLkgtzyus
https://yadi.sk/i/KJGXk_DKtzyuw
Make BIOS backup by Intel Flash Programming Tool
Win x64: http://dl.dropbox.com/u/6400726/FPT_Windows64.zip
Win x86: http://dl.dropbox.com/u/6400726/FPT_Windows32.zip
DOS: http://dl.dropbox.com/u/6400726/FPT_DOS.zip

E.g.: fptw64 -BIOS -D c:\Backupbios.bin
Pages: 1 2