Bios Mods - The Best BIOS Update and Modification Source

(06-24-2015, 09:34 AM)BDMaster Wrote: [ -> ]Ok We can use the Sleep Bug !
So unpack the Bios Mod file then copy modified folder into C: HD root place !
Then open a Comand Prompt with Admin Rights (CLI) and run this comands :

cd \

cd C:\modified

Then put the laptop into SLEEP mode and Wake-Ip It again so run these comand

fptw -f bios.bin -bios

(for win7 x64 use fptw64)
and look the result, You have to get PASSED after wote Bios.bin, then let me know !
Regards

Here is your Bios Mod :

http://rghost.net/8CQ4vNlhj

Let me know
Regards

Donate to me for my work and time . . . look into my Signature

Hi BDMaster,

Thanks for your help but the result is FAILED as below:

C:\modified>fptw -f bios.bin -bios

Intel ® Flash Programming Tool. Version: 10.0.30.1054
Copyright © 2007 - 2014, Intel Corporation. All rights reserved.

Platform: Intel® Premium Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid

--- Flash Devices Found ---
W25Q64BV ID:0xEF4017 Size: 8192KB (65536Kb)

PDR Region does not exist.
GBE Region does not exist.

- Reading Flash [0x800000] 4096KB of 4096KB - 100% complete.

Error 7: Hardware sequencing failed. Make sure that you have access to target fl
ash area!
Trying to erase the same block (iteration: 2)

Error 7: Hardware sequencing failed. Make sure that you have access to target fl
ash area!
Trying to erase the same block (iteration: 3)

Error 7: Hardware sequencing failed. Make sure that you have access to target fl
ash area!
Failed to erase this block 3 times!!

C:\modified>

Thanks,
Elvin

Dear friend I'm sending back the backup of my bios so you can make the modification again as I said before my note spoiled and had to change the same , I lost the modification made.
from already thank you very much get to your wait.



https://www.dropbox.com/s/u0k8lgruav452s...9.rom?dl=0

Here is your Bios Mod :

http://rghost.net/8HGNbcM5t

Let me know
Regards

Donate to me for my work and time . . . look into my Signature

(06-25-2015, 08:38 AM)BDMaster Wrote: [ -> ]Here is your Bios Mod :

http://rghost.net/8HGNbcM5t

Let me know
Regards

Donate to me for my work and time . . . look into my Signature

Hi BDMaster,

Is this one for my ideapad G70-70 or evertonprochinski?

Thanks,
Elvin

I wrote the name into Bios Mod so is your !
Regards

Donate to me . . . look into my Signature

Hi BDMaster ,

Thanks for the reply, I understand you wrote my name on the filename but the laptop model and bios version is totally difference than the one you gave me before?

The one you gave me last night was "Lenovo_G70-80-Z70-80_B6CN15WW_NWL_ADV_Elevenfire" , but the new one is "Lenovo_G400S_G500S_7BCN36WW_NWL_ADV_Elevenfire.rar "


I just want to make sure evertonprochinski's post won't mixed up our conversion last night

I here post again the failed result I got last night:

C:\modified>fptw64 -f bios.bin -bios

Intel ® Flash Programming Tool. Version: 10.0.30.1054
Copyright © 2007 - 2014, Intel Corporation. All rights reserved.

Platform: Intel® Premium Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid

--- Flash Devices Found ---
W25Q64BV ID:0xEF4017 Size: 8192KB (65536Kb)

PDR Region does not exist.
GBE Region does not exist.

- Reading Flash [0x800000] 4096KB of 4096KB - 100% complete.

Error 7: Hardware sequencing failed. Make sure that you have access to target fl
ash area!
Trying to erase the same block (iteration: 2)

Error 7: Hardware sequencing failed. Make sure that you have access to target fl
ash area!
Trying to erase the same block (iteration: 3)

Error 7: Hardware sequencing failed. Make sure that you have access to target fl
ash area!
Failed to erase this block 3 times!!

C:\modified>

So should I still use the same procedure to apply the new bios mod?

Million Thanks,
Elvin

(06-25-2015, 09:20 AM)elevenfire Wrote: [ -> ]Hi BDMaster ,

Thanks for the reply, I understand you wrote my name on the filename but the laptop model and bios version is totally difference than the one you gave me before?

The one you gave me last night was "Lenovo_G70-80-Z70-80_B6CN15WW_NWL_ADV_Elevenfire" , but the new one is "Lenovo_G400S_G500S_7BCN36WW_NWL_ADV_Elevenfire.rar "


I just want to make sure evertonprochinski's post won't mixed up our conversion last night

I here post again the failed result I got last night:

C:\modified>fptw64 -f bios.bin -bios

Intel ® Flash Programming Tool. Version: 10.0.30.1054
Copyright © 2007 - 2014, Intel Corporation. All rights reserved.

Platform: Intel® Premium Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid

--- Flash Devices Found ---
W25Q64BV ID:0xEF4017 Size: 8192KB (65536Kb)

PDR Region does not exist.
GBE Region does not exist.

- Reading Flash [0x800000] 4096KB of 4096KB - 100% complete.

Error 7: Hardware sequencing failed. Make sure that you have access to target fl
ash area!
Trying to erase the same block (iteration: 2)

Error 7: Hardware sequencing failed. Make sure that you have access to target fl
ash area!
Trying to erase the same block (iteration: 3)

Error 7: Hardware sequencing failed. Make sure that you have access to target fl
ash area!
Failed to erase this block 3 times!!

C:\modified>

So should I still use the same procedure to apply the new bios mod?

Million Thanks,
Elvin

Hi BDMaster,

In addition, the link you gave me to patch last night is http://rghost.net/8CQ4vNlhj

Thanks,
Elvin

(06-25-2015, 09:25 AM)elevenfire Wrote: [ -> ]

(06-25-2015, 09:20 AM)elevenfire Wrote: [ -> ]Hi BDMaster ,

Thanks for the reply, I understand you wrote my name on the filename but the laptop model and bios version is totally difference than the one you gave me before?

The one you gave me last night was "Lenovo_G70-80-Z70-80_B6CN15WW_NWL_ADV_Elevenfire" , but the new one is "Lenovo_G400S_G500S_7BCN36WW_NWL_ADV_Elevenfire.rar "


I just want to make sure evertonprochinski's post won't mixed up our conversion last night

I here post again the failed result I got last night:

C:\modified>fptw64 -f bios.bin -bios

Intel ® Flash Programming Tool. Version: 10.0.30.1054
Copyright © 2007 - 2014, Intel Corporation. All rights reserved.

Platform: Intel® Premium Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid

--- Flash Devices Found ---
W25Q64BV ID:0xEF4017 Size: 8192KB (65536Kb)

PDR Region does not exist.
GBE Region does not exist.

- Reading Flash [0x800000] 4096KB of 4096KB - 100% complete.

Error 7: Hardware sequencing failed. Make sure that you have access to target fl
ash area!
Trying to erase the same block (iteration: 2)

Error 7: Hardware sequencing failed. Make sure that you have access to target fl
ash area!
Trying to erase the same block (iteration: 3)

Error 7: Hardware sequencing failed. Make sure that you have access to target fl
ash area!
Failed to erase this block 3 times!!

C:\modified>

So should I still use the same procedure to apply the new bios mod?

Million Thanks,
Elvin

Hi BDMaster,

In addition, the link you gave me to patch last night is http://rghost.net/8CQ4vNlhj

Thanks,
Elvin

Hi BDMaster,

I used the bin file inside "Lenovo_G400S_G500S_7BCN36WW_NWL_ADV_Elevenfire.rar", unzip to c:\modified, put the notebook to sleep, wake it up and run:

fptw64 -f bios.bin -bios

and the got the prompt indicates the write length is longer than the file length as show as attached, which then I stopped there.

So I believe this file is not for my ideapad G70-70

Hope you can give me another file to patch.

Million Thanks,
Eric

Ok You posted this one ?

https://www.bios-mods.com/forum/Thread-R...7#pid92877

This You posted is your result file ?

Then I made an error like G70-80 and not G70-70 but the Bios Mod
is based on your Backup !

Here is again the Bios Mod based on your 2nd result file generated after
Sleep Bug (It seems showed working witout error 280) :

http://rghost.net/72h5WZD2Q

Let me know
Regards

P.S. You have to flash It like the 2nd result so put into Sleep Mpde your
laptop then Wake-Up It and execute the comand fptw -f bios.bin -bios

So unpack the Bios Mod file then copy modified folder into C: HD root place !
Then open a Comand Prompt with Admin Rights (CLI) and run this comands :

cd \

cd C:\modified

Then put the laptop into SLEEP mode and Wake-Ip It again so run these comand

fptw -f bios.bin -bios

(for win7 x64 use fptw64)
and look the result, You have to get PASSED after wote Bios.bin, then let me know !
Regards

(06-25-2015, 10:36 AM)BDMaster Wrote: [ -> ]Ok You posted this one ?

https://www.bios-mods.com/forum/Thread-R...7#pid92877

This You posted is your result file ?

Then I made an error like G70-80 and not G70-70 but the Bios Mod
is based on your Backup !

Here is again the Bios Mod based on your 2nd result file generated after
Sleep Bug (It seems showed working witout error 280) :

http://rghost.net/72h5WZD2Q

Let me know
Regards

P.S. You have to flash It like the 2nd result so put into Sleep Mpde your
laptop then Wake-Up It and execute the comand fptw -f bios.bin -bios

So unpack the Bios Mod file then copy modified folder into C: HD root place !
Then open a Comand Prompt with Admin Rights (CLI) and run this comands :

cd \

cd C:\modified

Then put the laptop into SLEEP mode and Wake-Ip It again so run these comand

fptw -f bios.bin -bios

(for win7 x64 use fptw64)
and look the result, You have to get PASSED after wote Bios.bin, then let me know !
Regards

Hi BDMaster,

Thanks for your help. The result is still failed. Please find the the result attached.

Million Thanks,
Elvin