No I haven't tried 5.0 with 2435. But I can try. Tyan added Istambul support from 5.0 so I think only this version can be considered.
Krzysztof
Try versions without Istambul support. For example:
S2912_v400
It's
S2912WG2NR with simple VRM.
I just checked. With BIOS 5.0 behavior is the same. Post codes 86-87-FF
Please flash BIOS 5.01 and make two strange experiments: 2435(CPU1)+2378(CPU2) and 2378(CPU1)+2435(CPU2).
I need POST codes.
in both cases it was 86-87 and hanging at 87. I double checked my 2435s and during post for both says opteron 2435 2600MHZ so the same. I have to leave house now, will be back in few hours. So maybe it don't recognize 2435 from 2CPU socket as post codes are the same ??
(05-15-2016, 08:25 AM)krzysiaczek99 Wrote: [ -> ]I double checked my 2435s and during post for both says opteron 2435 2600MHZ so the same.
I don't understand you. On the screen?
Have you installed
HTX Riser Card? Try to boot two 2435 without it.
When it posts it show processor model so I double checked if i have exact the same 2435s (by swapping them in CPU1 socket) and yes, they are the same. HTX connector is empty.
I think it's hardware problem. Different motherboards based on NVIDIA nForce Professional 3600 chipset have the same problem. Only newest revision of these motherboards can boot two six-core CPUs.
sounds bad, for sure this board is old. Anyway I will send mail to TYAN and ask about it. Maybe they will answer...