06-27-2016, 03:22 AM
06-27-2016, 03:22 AM
06-27-2016, 05:38 AM
I think your notebook doesn't support FSB=1066 Mhz. So you can't use T9600.
Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with native CPU.
Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with native CPU.
06-27-2016, 10:10 AM
(06-27-2016, 05:38 AM)DeathBringer Wrote: [ -> ]I think your notebook doesn't support FSB=1066 Mhz. So you can't use T9600.
Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with native CPU.
Yes of course, how stupid not to notice that :S
Would a CPU with the same bus speed as the T3000 have a better compatibility, for instance this T9300?
Another problem might be that the original is an Intel Celeron and the T9300 is a Intel Core 2 Duo, what do you think?
Thank you for your advice.
Ant
06-27-2016, 11:45 AM
Perhaps T9300 can boots in your laptop.
But I don't know the model of your laptop. So I need to see requested screenshots.
But I don't know the model of your laptop. So I need to see requested screenshots.
06-28-2016, 04:39 AM
(06-27-2016, 11:45 AM)DeathBringer Wrote: [ -> ]Perhaps T9300 can boots in your laptop.
But I don't know the model of your laptop. So I need to see requested screenshots.
Thank you for your help so far
Here are the requested screenshots of the CPU and Mainboard tabs from CPU-Z
Ant
[attachment=10834]
[attachment=10835]
06-28-2016, 06:08 AM
Your BIOS (1.34) has needed microcode for T9300.
06-28-2016, 07:56 AM
(06-28-2016, 06:08 AM)DeathBringer Wrote: [ -> ]Your BIOS (1.34) has needed microcode for T9300.
Is there a modded Phoenix BIOS that is supported by my motherboard AND has the T9300 mircocode?
Bit of a wild stab in the dark but worth asking
Ant
06-28-2016, 08:39 AM
You don't need any mod. Native BIOS (installed already) supports T9300.
06-28-2016, 08:55 AM
Great Thank you for your time
Just one more question:
I performed an intelmicrocodelist test on the stock 1.34 rom (JV50134.rom) and got this list...
The Acer's stock CPU is the T3000 and I can clearly see it's CPUID in the list as 1067A. If I put in the T9300 (CPUID=010676h) will it run OK with the T3000's microcode or will there be limited functionality/missing instructions/voltages etc?
To be honest, I'm not really sure what the function of a microcode is
...but if you say it's OK then I'll buy the CPU upgrade!
Ant
Just one more question:
I performed an intelmicrocodelist test on the stock 1.34 rom (JV50134.rom) and got this list...
Code:
CPUID=10671 Rev=106 2007/03/29 CRC=80731B2D Off=1F10E0 Size=1000 Plat=7
CPUID=10674 Rev=405 2007/07/20 CRC=735D9FE0 Off=1F20E0 Size=1000 Plat=7
CPUID=10676 Rev=60C 2008/01/19 CRC=FBAC0EED Off=1F30E0 Size=1000 Plat=7
CPUID=1067A Rev=A07 2008/04/09 CRC=83067ECB Off=1F40E0 Size=2000 Plat=5,7
CPUID=6F9 Rev=83 2006/09/28 CRC=85B7E1DF Off=1F60E0 Size=1000 Plat=7
CPUID=6FD Rev=A3 2007/08/13 CRC=89C0D01F Off=1F70E0 Size=1000 Plat=7
CPUID=6FA Rev=92 2007/03/13 CRC=13ED7841 Off=1F80E0 Size=1000 Plat=7
To be honest, I'm not really sure what the function of a microcode is
...but if you say it's OK then I'll buy the CPU upgrade!
Ant