(08-13-2017, 11:42 PM)saikatpaik Wrote: [ -> ] (05-07-2017, 10:15 AM)mclarke2355 Wrote: [ -> ]Hi,
the flashing of the modded BIOS might not work because the recovery checks the signature of the BIOS file.
However, you might be able to enable AMD-V using this method (needs to be adapted): http://www.geektech.co.nz/how-to-unlock-...enovo-y700
This method requires Windows as a system as the necessary tool is only available for Windows.
First, you will need the tool: https://drive.google.com/file/d/0B4NHIBM...RtQXM/view
Extract the archive and go to the folder with the extracted files.
Then, you need to open an administrative command prompt in that folder (google it if you don't know how).
Execute the command from step 1 of the linked guide in that command prompt (H2OUVE.exe -gv vars.txt).
After that, you'll have the file "vars.txt" in that folder.
You need to upload this file, so that I can make the change.
For reference, here's the EFI-table with available settings for this notebook: https://drive.google.com/open?id=0B4NHIB...WI4LW14bE0
And here's the setting that needs to be changed:
0x1C40B Setting: SVM support, Variable: 0xEE {05 91 54 02 55 02 54 00 34 12 EE 00 00 10 00 01 00}
0x1C41C Option: Disabled, Value: 0x0 (default) {09 07 27 00 10 00 00}
0x1C423 Option: Enabled, Value: 0x1 {09 07 28 00 00 00 01}
Hi,
My laptop is Acer E5 - 553 T4PT. I want to enable amd- Virtualization. I have attached and also uploaded the vars.txt file in my google drive. Please help me to enable virtualization.
Link - https://drive.google.com/file/d/0B8u_kD8...sp=sharing
Thanks.
Hi,
here's your modded vars-file with AMD-V enabled:
https://www.sendspace.com/file/38gfjh
You need to put the vars_mod_saikatpaik.txt file in the folder with the H2OUVE.exe file and execute the following command in an administrative command prompt in that folder:
H2OUVE.exe -sv vars_mod_saikatpaik.txt
H2OUVE will update the NVRAM area of the BIOS and after a reboot the new setting should be active.
This method will only enable AMD-V and not mess with any of the other settings of your BIOS.
In case you want to revert to default, you can go back to default with the following command:
H2OUVE.exe -sv vars.txt
Using the reset to defaults option in the BIOS would work, too.
(08-14-2017, 02:43 AM)feluchi Wrote: [ -> ] (08-13-2017, 11:42 PM)saikatpaik Wrote: [ -> ] (05-07-2017, 10:15 AM)mclarke2355 Wrote: [ -> ]Hi,
the flashing of the modded BIOS might not work because the recovery checks the signature of the BIOS file.
However, you might be able to enable AMD-V using this method (needs to be adapted): http://www.geektech.co.nz/how-to-unlock-...enovo-y700
This method requires Windows as a system as the necessary tool is only available for Windows.
First, you will need the tool: https://drive.google.com/file/d/0B4NHIBM...RtQXM/view
Extract the archive and go to the folder with the extracted files.
Then, you need to open an administrative command prompt in that folder (google it if you don't know how).
Execute the command from step 1 of the linked guide in that command prompt (H2OUVE.exe -gv vars.txt).
After that, you'll have the file "vars.txt" in that folder.
You need to upload this file, so that I can make the change.
For reference, here's the EFI-table with available settings for this notebook: https://drive.google.com/open?id=0B4NHIB...WI4LW14bE0
And here's the setting that needs to be changed:
0x1C40B Setting: SVM support, Variable: 0xEE {05 91 54 02 55 02 54 00 34 12 EE 00 00 10 00 01 00}
0x1C41C Option: Disabled, Value: 0x0 (default) {09 07 27 00 10 00 00}
0x1C423 Option: Enabled, Value: 0x1 {09 07 28 00 00 00 01}
Hi,
My laptop is Acer E5 - 553 T4PT. I want to enable amd- Virtualization. I have attached and also uploaded the vars.txt file in my google drive. Please help me to enable virtualization.
Link - https://drive.google.com/file/d/0B8u_kD8...sp=sharing
Thanks.
Hi,
here's your modded vars-file with AMD-V enabled: https://www.sendspace.com/file/38gfjh
You need to put the vars_mod_saikatpaik.txt file in the folder with the H2OUVE.exe file and execute the following command in an administrative command prompt in that folder:
H2OUVE.exe -sv vars_mod_saikatpaik.txt
H2OUVE will update the NVRAM area of the BIOS and after a reboot the new setting should be active.
This method will only enable AMD-V and not mess with any of the other settings of your BIOS.
In case you want to revert to default, you can go back to default with the following command:
H2OUVE.exe -sv vars.txt
Using the reset to defaults option in the BIOS would work, too.
Thank you very much. Now, I can able to user Virtual-box as well android emulator.
(05-07-2017, 10:15 AM)mclarke2355 Wrote: [ -> ]Hi,
the flashing of the modded BIOS might not work because the recovery checks the signature of the BIOS file.
However, you might be able to enable AMD-V using this method (needs to be adapted): http://www.geektech.co.nz/how-to-unlock-...enovo-y700
This method requires Windows as a system as the necessary tool is only available for Windows.
First, you will need the tool: https://drive.google.com/file/d/0B4NHIBM...RtQXM/view
Extract the archive and go to the folder with the extracted files.
Then, you need to open an administrative command prompt in that folder (google it if you don't know how).
Execute the command from step 1 of the linked guide in that command prompt (H2OUVE.exe -gv vars.txt).
After that, you'll have the file "vars.txt" in that folder.
You need to upload this file, so that I can make the change.
For reference, here's the EFI-table with available settings for this notebook: https://drive.google.com/open?id=0B4NHIB...WI4LW14bE0
And here's the setting that needs to be changed:
0x1C40B Setting: SVM support, Variable: 0xEE {05 91 54 02 55 02 54 00 34 12 EE 00 00 10 00 01 00}
0x1C41C Option: Disabled, Value: 0x0 (default) {09 07 27 00 10 00 00}
0x1C423 Option: Enabled, Value: 0x1 {09 07 28 00 00 00 01}
Hi mine is from an E5-553G-1986 hope you can help me out thanks. i just updated to the latest bios version
Okay i have figured out how to edit the bios to enable AMD-V and it works fine but i do have a problem my laptop comes out of sleep mode but the screen does not i have to do a hard power off and back on to get the screen back. anyone have this problem or know how to fix it?
(08-17-2017, 09:31 AM)winzeny Wrote: [ -> ]Hi mclarke2355.
Here my file. My laptop is Acer E5-553G-T03K need to AMD-V enable. please
https://drive.google.com/file/d/0B99q5tV...sp=sharing
Thank You.
Hi,
here's your modded vars-file with AMD-V enabled:
https://www.sendspace.com/file/v9j26p
You need to put the vars_mod_winzeny.txt file in the folder with the H2OUVE.exe file and execute the following command in an administrative command prompt in that folder:
H2OUVE.exe -sv vars_mod_winzeny.txt
H2OUVE will update the NVRAM area of the BIOS and after a reboot the new setting should be active.
This will only enable AMD-V and not mess with any of the other settings of your BIOS.
In case you want to revert to default, you can go back to default with the following command:
H2OUVE.exe -sv vars.txt
Using the reset to defaults option in the BIOS would work, too.
HI.....I HAVE ACER ASPIRE E5-553 T4PT LAPTOP WITH AMD-V DISABLED IN MY BIOS.
I AM UPLOADING MY VARS.TXT FILE.....COULD YOU PLEASE MODIFY IT AND ENABLE AMD-V FOR IT?
BIOS VERSION 1.19....I FORGOT TO TELL THIS VERSION OF THE BIOS SUPPORTS SPI FLASH,HOWEVER I DON'T KNOW WHAT DOES IT MEAN
https://drive.google.com/open?id=0B3-0Mo...khZUGp1cDA
THANKING YOU,
RATAN
Hey I need help with Enable VT!
Acer Aspire E5-553G-T03K