Bios Mods -The Best BIOS Update and Modification Source

Maybe I'm not doing it correct? 
Rename eu36.09 to eu36.rom and run safuwin as administrator. Is that correct?

Try AFUWIN for flashing.
Read this: http://www.ecs.com.tw/extra/flashutl/afuwin.pdf
Or flash it from native DOS:
afudos eu36.09 /P /B /N /C /E /K /Q /REBOOT

(11-10-2016, 11:15 AM)DeathBringer Wrote: [ -> ]Try AFUWIN for flashing.
Read this: http://www.ecs.com.tw/extra/flashutl/afuwin.pdf
Or flash it from native DOS:
afudos eu36.09 /P /B /N /C /E /K /Q /REBOOT

Flash under DOS return error "Flash part is not supported"

Try without /E /K

Same thing

Well, I give up. My useless mods are deleted.

I have an HP Pro 3120 microtower pc that came with a dual core e5500. Right now i have a dual core e5700 but i also bought a core 2 quad q9500 thinking it would work since the file i got from the hp site suggested it would work. But guess what, it doesn't   . However i think its only the bios that is blocking it and i'm hoping that theres a solution for it.

the file i got from the hp site: https://www.sendspace.com/file/9uhesi

my pc: https://www.sendspace.com/file/o2szxo

Motherboard: IPIEL-LA3 rev 1.03 HP 612499-001

Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with current CPU.
What happens exactly when you try to boot with new CPU? Show photo of errors.

(12-05-2017, 09:45 AM)DeathBringer Wrote: [ -> ]Post screenshots of first (CPU) & third (Mainboard) tabs of CPU-Z with current CPU.
What happens exactly when you try to boot with new CPU? Show photo of errors.

Screenshots from cpuz below. 
When i install the "new" cpu (q9500) i get no signal on the monitor and i hear beeps from the motherboard.
Didn't understand if you want just photos of the first cpu (e5500) or you want me to install it and give you a screenshot of cpuz with it installed?
Thank you for your time   !

Try to update BIOS - http://ftp.hp.com/pub/softpaq/sp56501-57000/sp56794.exe