What I would like is for the Bios to be fully unlocked so that I can access all menus and adjust as needed if you could please?
Thank you ahead of time.
This is the link of the bios
http://yadi.sk/d/LHcxt4Da28fUb
Hallo,
I have a Packard Bell LJ75 with maximal restricted Insyde bios.
[Insyde H2O EFI 2.0 NB v1.08 Rev. 3.5]
So I can't use my new RAM (wrong bios settings) nor I can start a virtual machine because hardware visualization is disabled, too.
I hope someone could help me, this is really frustrating, not been able to use EXISTING hardware features only because Insysde (or Packard Bell) restrict it.
The bios can be found there:
http://global-download.packardbell.com/G...SC=EMEA_8P
...or direct here (.fd-file):
[
attachment=5817]
Screenshot (photo) of the current status of the bios setup:
[
attachment=5815]
[
attachment=5816]
Thanks to everyone who is trying to help!
Greetings,
Taurus
Thank you :-)
I flash the Bios over Windows.. in the bios i dont have new settings :/
You get some error ?
Try to flash from Dos !
They are the same but with name different, may be I done a
mistake not changing file !
Let me know
Regards
Thanks :-)
No i got no erros with flashing
I find a mod bios in the internet
https://www.sendspace.com/file/3393ok
that show me a link to the website in my boot picture..
that unlock the advance menu only.. I testing your BIOS agian later with DOS
Menu Tabs Unlock Mod :
FE3542FE-C1D3-4EF8-657C-8048606FF670_702.ROM Setuputility
Form Sets
--------------------------------------------------------------------------------
Offset: Name:
--------------------------------------------------------------------------------
0x7B8C0 Main (0x48)
0x7BC70 Exit (0x2F4)
0x7BD00 Boot (0x2DA)
0x7BE80 Power (0x279)
0x7C3F0 Security (0x23D)
0x7C560 Advanced (0x5F)
0x80520 Information (0x3)
124C : 0F 84 9E 00 00 00 to 0F 84 00 00 00 00 jz loc_1800012F0 to jz $+6
1260 : 0F 84 8A 00 00 00 to 0F 84 00 00 00 00 jz loc_1800012F0 to jz $+6
These are Locks disabled !!!
Only issue can be the UEFITool 0.19.6 which I used to modify this Bios !
So I can redo using PMT 2.59 and reupload the mod !
Regards