Hi
Recently I bought Dell Aurora R4 board and Xeon E5 2609.
I put them together , but the system will not post.
I guess this probably is due to the cpu support of the motherboard.
I tried myself to to that, but no success..
Tried to extract,with phoenixtool258, from the executable the bios image. It gives me error codes: "Bad command parameter" and "failed to extract HDR file"
Here's link to bios:
http://www.dell.com/support/home/en/zh/c...erId=FKCD8&fileId=3334985347&osCode=W764&productCode=alienware-aurora-r4&languageCode=EN&categoryId=BI
Could you, please, help me update cpu microde section of the bios?
Best regards,
Deebo
You can try to downgrade present bios to lower version ,like a05,you may get a
good result .
If the bios's cpu microcode doesn't include xeon e5-2609, Downgrading will be useless.
I tried to decompress older bioses(a09,a07) with same luck - "bad command parameter" and "failed to extract hdr".
I also found on the net, that via windows' cmd one should be able to extract, using command: file's_name /writeromfile or /writehdr file. result is "bad command parameter".
I am trying to do the extraction on win7 64 bit, could this pose a problem?
I am newbie, so please any advice will be great.
regards!
Hi,
Wondering if there is someone that can help me upgrade my Alienware R4 desktop with A11 with the latest support for v2 chips specifically e5-2680?
Much appreciated for any help..
Thanks
Your motherboard is based on
X79 chipset.
I've found
latest BIOS (A11).
It has the microcode for CPUID=
306E4 version - 416, date - 07/09/2013.
It's enough to boot E5-2680 v2.
Note that
Core i7-4xxx and
Xeon E5-26xx v2 for LGA2011 use common microcode.
Hi. We're trying to get the chip below (QE2T) to run on the Alienware Aurora R4 running on A11 bios.
[
attachment=11849]
We've also tried the following Ivy Bridge-E ES processors: QE83 (i7-4960X) and QE5F (E5-2680v2), and they don't work.
Ivy Bridge-E QS and retail processors work just fine though.
The said Ivy Bridge-E ES processors including the QE2T (E5-2687Wv2) work just fine on the Asus Z9PE-D8 WS.
I noticed the ES processors all have the
same microcode update revision: 20D.
How can we get these Ivy Bridge-E engineering samples to work on the Alienware Aurora R4?
Is it as simple as adding some additional microcode to the bios?
The image below shows the microcodes contained on both the Asus and Alienware motherboards mentioned and they appear to have the same microcode required.
CPU ID 306E4 covers all E5-26xx V2 processors and the Core i7-4820K, 4930K and 4960X, which are all Ivy Bridge-E.
Both motherboards have this microcode.
[
attachment=11851]
Any help will be appreciated.
What happen exactly when you try to boot up with these ES CPU?
(02-01-2017, 01:36 PM)DeathBringer Wrote: [ -> ]What happen exactly when you try to boot up with these ES CPU?
Sorry for the late reply. It just won't post. I turn on the PC and nothing happens. No sounds or anything. Nothing shows on the display.
I've already tried disabling features on the motherboard like XD-Bit and Hyperthreading and it still won't post with the QE2T.
What do you think is the problem and can it be fixed through a bios mod?
Have you Asus Z9PE-D8 WS?