Hello everyone.
I, too, am looking for a modded 2.05 Insyde Corp. BIOS, with the Virtualisation extensions enabled. Could someone help, please?
Dagey
(08-29-2017, 05:30 PM)Dagey Wrote: [ -> ]Hello everyone.
I, too, am looking for a modded 2.05 Insyde Corp. BIOS, with the Virtualisation extensions enabled. Could someone help, please?
Dagey
You might be able to enable "SVM Support" using this method (needs to be adapted):
http://www.geektech.co.nz/how-to-unlock-...enovo-y700
This method requires Windows as a system as the necessary tool is only available for Windows.
First, you will need the tool:
https://drive.google.com/file/d/0B4NHIBM...RtQXM/view
Extract the archive and go to the folder with the extracted files.
Then, you need to open an administrative command prompt in that folder (google it if you don't know how).
Execute the command from step 1 of the linked guide in that command prompt (H2OUVE.exe -gv vars.txt).
After that, you'll have the file "vars.txt" in that folder.
You need to upload this file, so that I can make the change.
(08-29-2017, 10:46 PM)feluchi Wrote: [ -> ] (08-29-2017, 05:30 PM)Dagey Wrote: [ -> ]Hello everyone.
I, too, am looking for a modded 2.05 Insyde Corp. BIOS, with the Virtualisation extensions enabled. Could someone help, please?
Dagey
You might be able to enable "SVM Support" using this method (needs to be adapted): http://www.geektech.co.nz/how-to-unlock-...enovo-y700
This method requires Windows as a system as the necessary tool is only available for Windows.
First, you will need the tool: https://drive.google.com/file/d/0B4NHIBM...RtQXM/view
Extract the archive and go to the folder with the extracted files.
Then, you need to open an administrative command prompt in that folder (google it if you don't know how).
Execute the command from step 1 of the linked guide in that command prompt (H2OUVE.exe -gv vars.txt).
After that, you'll have the file "vars.txt" in that folder.
You need to upload this file, so that I can make the change.
Thanks Feluchi,
Sorry it took me so long to get back to you, busy week! Here is the var.txt file. Thank you again for your help.
Dagey
(09-02-2017, 07:30 PM)Dagey Wrote: [ -> ] (08-29-2017, 10:46 PM)feluchi Wrote: [ -> ] (08-29-2017, 05:30 PM)Dagey Wrote: [ -> ]Hello everyone.
I, too, am looking for a modded 2.05 Insyde Corp. BIOS, with the Virtualisation extensions enabled. Could someone help, please?
Dagey
You might be able to enable "SVM Support" using this method (needs to be adapted): http://www.geektech.co.nz/how-to-unlock-...enovo-y700
This method requires Windows as a system as the necessary tool is only available for Windows.
First, you will need the tool: https://drive.google.com/file/d/0B4NHIBM...RtQXM/view
Extract the archive and go to the folder with the extracted files.
Then, you need to open an administrative command prompt in that folder (google it if you don't know how).
Execute the command from step 1 of the linked guide in that command prompt (H2OUVE.exe -gv vars.txt).
After that, you'll have the file "vars.txt" in that folder.
You need to upload this file, so that I can make the change.
Thanks Feluchi,
Sorry it took me so long to get back to you, busy week! Here is the var.txt file. Thank you again for your help.
Dagey
Hi,
Here's your modded vars-file with AMD-V enabled:
http://www99.zippyshare.com/v/2989rrQK/file.html
You need to put the
vars_mod_Dagey.txt file in the folder with the H2OUVE.exe file and execute the following command in an administrative command prompt in that folder:
H2OUVE.exe -sv vars_mod_Dagey.txt
H2OUVE will update the NVRAM area of the BIOS and after a reboot the new setting should be active.
This will only enable AMD-V and not mess with any of the other settings of your BIOS.
In case you want to revert to default, you can go back to default with the following command:
H2OUVE.exe -sv vars.txt
Using the reset to defaults option in the BIOS would work, too.
(09-04-2017, 01:17 AM)feluchi Wrote: [ -> ] (09-02-2017, 07:30 PM)Dagey Wrote: [ -> ] (08-29-2017, 10:46 PM)feluchi Wrote: [ -> ] (08-29-2017, 05:30 PM)Dagey Wrote: [ -> ]Hello everyone.
I, too, am looking for a modded 2.05 Insyde Corp. BIOS, with the Virtualisation extensions enabled. Could someone help, please?
Dagey
You might be able to enable "SVM Support" using this method (needs to be adapted): http://www.geektech.co.nz/how-to-unlock-...enovo-y700
This method requires Windows as a system as the necessary tool is only available for Windows.
First, you will need the tool: https://drive.google.com/file/d/0B4NHIBM...RtQXM/view
Extract the archive and go to the folder with the extracted files.
Then, you need to open an administrative command prompt in that folder (google it if you don't know how).
Execute the command from step 1 of the linked guide in that command prompt (H2OUVE.exe -gv vars.txt).
After that, you'll have the file "vars.txt" in that folder.
You need to upload this file, so that I can make the change.
Thanks Feluchi,
Sorry it took me so long to get back to you, busy week! Here is the var.txt file. Thank you again for your help.
Dagey
Hi,
Here's your modded vars-file with AMD-V enabled: http://www99.zippyshare.com/v/2989rrQK/file.html
You need to put the vars_mod_Dagey.txt file in the folder with the H2OUVE.exe file and execute the following command in an administrative command prompt in that folder:
H2OUVE.exe -sv vars_mod_Dagey.txt
H2OUVE will update the NVRAM area of the BIOS and after a reboot the new setting should be active.
This will only enable AMD-V and not mess with any of the other settings of your BIOS.
In case you want to revert to default, you can go back to default with the following command:
H2OUVE.exe -sv vars.txt
Using the reset to defaults option in the BIOS would work, too.
Thank you very much indeed. Works perfectly! Is there a listing of what the values in the Bios mean? I fancy learning a bit more about all this.
Dagey
(09-04-2017, 01:17 AM)feluchi Wrote: [ -> ] (09-02-2017, 07:30 PM)Dagey Wrote: [ -> ] (08-29-2017, 10:46 PM)feluchi Wrote: [ -> ] (08-29-2017, 05:30 PM)Dagey Wrote: [ -> ]Hello everyone.
I, too, am looking for a modded 2.05 Insyde Corp. BIOS, with the Virtualisation extensions enabled. Could someone help, please?
Dagey
You might be able to enable "SVM Support" using this method (needs to be adapted): http://www.geektech.co.nz/how-to-unlock-...enovo-y700
This method requires Windows as a system as the necessary tool is only available for Windows.
First, you will need the tool: https://drive.google.com/file/d/0B4NHIBM...RtQXM/view
Extract the archive and go to the folder with the extracted files.
Then, you need to open an administrative command prompt in that folder (google it if you don't know how).
Execute the command from step 1 of the linked guide in that command prompt (H2OUVE.exe -gv vars.txt).
After that, you'll have the file "vars.txt" in that folder.
You need to upload this file, so that I can make the change.
Thanks Feluchi,
Sorry it took me so long to get back to you, busy week! Here is the var.txt file. Thank you again for your help.
Dagey
Hi,
Here's your modded vars-file with AMD-V enabled: http://www99.zippyshare.com/v/2989rrQK/file.html
You need to put the vars_mod_Dagey.txt file in the folder with the H2OUVE.exe file and execute the following command in an administrative command prompt in that folder:
H2OUVE.exe -sv vars_mod_Dagey.txt
H2OUVE will update the NVRAM area of the BIOS and after a reboot the new setting should be active.
This will only enable AMD-V and not mess with any of the other settings of your BIOS.
In case you want to revert to default, you can go back to default with the following command:
H2OUVE.exe -sv vars.txt
Using the reset to defaults option in the BIOS would work, too.
Hello, I have seen this post but I can not download the file since it is expired, can upload it again?
(11-28-2017, 09:10 PM)MICROVICIAO Wrote: [ -> ]... can upload it again?
Hi!
No, that file only for
Dagey laptop. Each modified file is personal.
(11-29-2017, 03:23 AM)feluchi Wrote: [ -> ] (11-28-2017, 09:10 PM)MICROVICIAO Wrote: [ -> ]... can upload it again?
Hi!
No, that file only for Dagey laptop. Each modified file is personal.
Hi,Sir,this is my vars.txt,may i get the edited vars.txt?
seems like zippyshare link in this post are dead by now
thanks a lot...,and how can i donate?