(06-15-2017, 11:55 AM)DeathBringer Wrote: [ -> ]Good. Change FSB.
Ok fsb@1333.3, do you think I'd be able to push memory to 1066
Show first tab of CPU-Z with "fsb@1333.3". This motherboard support DDR2 800 Mhz maximum.
[
attachment=12661]
(06-15-2017, 12:26 PM)DeathBringer Wrote: [ -> ]Show first tab of CPU-Z with "fsb@1333.3". This motherboard support DDR2 800 Mhz maximum.
Ok its at 1333.3 fsb. And I put the memory to 1066 and it would start but the temps were to hot, so its back to 800
Ok. This task is solved.
It's old screenshot!
(06-15-2017, 12:56 PM)DeathBringer Wrote: [ -> ]Ok. This task is solved.
Question, is the fsb multiplied by 9 ? so 199.99x9=1.799 is this correct ?
FSB=800 on your screenshot, not 1333.
(06-15-2017, 12:56 PM)DeathBringer Wrote: [ -> ]Ok. This task is solved.
It's old screenshot!
Thats after I put fsb to 1333
Show page in BIOS with current settings with FSB.
[
attachment=12662]
(06-15-2017, 01:04 PM)DeathBringer Wrote: [ -> ]Show page in BIOS with current settings with FSB.
Would heat stop the proc from going 1333fsb. And the computer will not restart after changes, I have to shut down then restart.
Oh shoot I see I have it linked, no wonder.
You should set Memory Ratio to get 800 Mhz for memory.
Find the manual for overclocking!