11-17-2017, 09:01 PM
I flashed a custom AMI-based BIOS onto a Supermicro X10DRT-L system, using a SPI programmer.
Programming was successful, at least based on the LEDs on the tool and the output from the software.
I turned the computer on. The fans come on for less than a second and turn back off. This repeats every 5 seconds (exactly). There is no output whatsoever.
What could be causing this?
I did not play around with the ME area of the BIOS.
Is it possible that IPMI parameters need to be modified?
Thanks!
Programming was successful, at least based on the LEDs on the tool and the output from the software.
I turned the computer on. The fans come on for less than a second and turn back off. This repeats every 5 seconds (exactly). There is no output whatsoever.
What could be causing this?
I did not play around with the ME area of the BIOS.
Is it possible that IPMI parameters need to be modified?
Thanks!